Items where Division is "REF UoA Output Collections > REF 2021 UoA12: Engineering" and Year is 2015

Up a level
Export as [feed] RSS
Group by: Creators | Item Type | No Grouping
Number of items: 44.

Article

Alaswad, A. and Dassisti, M. and Prescott, T. and Olabi, A.G. (2015) Technologies and developments of third generation biofuel production. Renewable and Sustainable Energy Reviews, 51. pp. 1446-1460. ISSN 1364-0321

Annaz, Fawaz (2015) UAV Testbed Training Platform development using Panda3d. Industrial Robot: An International Journal, 42 (5). pp. 450-456. ISSN 0143-991X

Bajda, Szymon and Krzyzanowski, Michal and Muszka, K. and Rainforth, W. Mark (2015) Numerical analysis of highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by using duplex technique. Surface & Coatings Technology, 277. pp. 170-180. ISSN 0257-8972

Bedini, Ivan and Teschioni, Andrea and Lo Cigno, Renato and Maccari, Leonardo and Farazi, Mohammad Feroz and Gruosso, Giambattista and Marconi, Annapaola and Conti, Giuseppe (2015) Fostering Smart Mobility for Middle Sized Cities. IEEE-TN SMART CITIES WHITE PAPER.

Brito, C.H.G. and Maia, C.B. and Sodre, Jose Ricardo (2015) A Mathematical Model for the Exhaust Gas Temperature Profile of a Diesel Engine. Journal of Physics: Conference Series. ISSN 1742-6588

Cheneler, David and Ward, Michael (2015) Power output and efficiency of beta-emitting microspheres. Radiation Physics and Chemistry, 106. pp. 204-212. ISSN 0969-806X

Contreras-Andrade, Ignatius and Avella-Moreno, Eliseo and Sierra-Cantor, Jonathan and Guerrero-Fajardo, Carlos Alberto and Sodre, Jose Ricardo (2015) Purification of glycerol from biodiesel production by sequential extraction monitored by 1H NMR. Fuel Processing Technology, 132. pp. 99-104. ISSN 0378-3820

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2015) Investigation of Enhancement of Heat Transfer in Natural Convection Utilizing of Nanofluids. International Journal of Mechanical and Mechatronics Engineering, 9 (2). ISSN 2077-124X

Fu, Yang and Wu, Wenyan and Gao, Jinliang (2015) Simulation and conservation of the end use water based on behaviour intervention modelling. Procedia Engineering, 119 (2015). pp. 761-770. ISSN 1877-7058, ESSN: 1877-7058

Gilkinson, N. and Raju, P. and Kiviniemi, A. and Chapman, C. (2015) Building information modelling: The tide is turning. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 168 (2). pp. 81-93. ISSN 09650911 (ISSN)

Guéniat, Florimond and Mathelin, Lionel and Pastur, Luc (2015) A dynamic mode decomposition approach for large and arbitrarily sampled systems. Physics of Fluids, 27 (2). ISSN 1070-6631

Hasan, Md. Rashedul and Farazi, Mohammad Feroz and Bursi, Oreste and Reza, Md. Shahin and D'Avanzo, Ernesto (2015) A Semantic-Aware Data Management System for Seismic Engineering Research Projects and Experiments. International Journal of Advanced Research in Artificial Intelligence, 4 (4). pp. 54-59. ISSN 2165-4069

Hussain, Ambreen and Wu, Wenyan (2015) Implementation of OGC Compliant Framework for Data Integration in Water Distribution System. Procedia Engineering, 119 (2015). pp. 1366-1374. ISSN 1877-7058

Jin, Xi and Wu, Wenyan (2015) Merged two-level optimization for optimal pump operation of large scale urban water distribution system. Journal of Water Supply: Research and Technology, 64 (8). pp. 915-926. ISSN 0003-7214

Kara-Mohamed, Mohamed and Heath, William and Lanzon, Alexander (2015) Enhanced Tracking for Nanopositioning Systems Using Feedforward/Feedback Multivariable Control Design. IEEE Transactions on Control Systems Technology, 23 (3). pp. 1003-1013.

Krzyzanowski, Michal and Bajda, Szymon and Rainforth, W. Mark (2015) Interface oxidation in combined nanocrystallisation proceses involving subsequent thermomechanical processing. Proc. PLASTICITY’15: 21st Int. Symposium on Plasticity and its Current Applications. pp. 70-72.

Lafont, Jennifer Judith and Espitia, Amelia Andrea and Sodre, Jose Ricardo (2015) Potential vegetable sources for biodiesel production: cashew, coconut and cotton. Materials for Renewable and Sustainable Energy, 4 (1).

Rodrigues Teixeira, Ana Carolina and da Silva, Danilo Liberio and Machado Neto, Lauro de Vilhena and Alves Cardozo Diniz, Antonia Sonia and Sodre, Jose Ricardo (2015) A review on electric vehicles and their interaction with smart grids: the case of Brazil. Clean Technologies and Environmental Policy, 17 (4). pp. 841-857. ISSN 1618-954X

Sapkota, Krishna and Raju, Pathmeswaran and Chapman, Craig and Byrne, William and Melville, L. (2015) Bioenergy Ontology for Automatic Pathway Generation. International Journal of Knowledge Engineering-IACSIT, 1 (1). pp. 1-8. ISSN 23826185

Sroka, Jakub and Bajda, Szymon and Krzyzanowski, Michal and Rainforth, W. Mark (2015) Identification of scale failure parameters for low carbon steel oxides essential for hot rolling. Proc. The 6th Int. Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking - STEELSIM 2015.

Tang, Zhaozhao and Wu, Wenyan and Gao, jinliang (2015) Water Pressure Sensing based on Wireless Passive SAW Technology. Procedia Engineering, 119 (2015). pp. 892-900. ISSN 1877-7058, ESSN: 1877-7058

Yang, Junfeng and Jimenez Serratos, Maria G. and Fari-Arole, Damilola and Muller, Erich and Matar, O.K. (2015) Crude Oil Fouling: Fluid Dynamics, Reactions and Phase Change. Procedia IUTAM, 15. pp. 186-193. ISSN 2210-9838

Zhao, Liang and Zhang, Jili and Shen, Yue and Wu, Wenyan (2015) Design and Implementation of Energy Saving Controller for Air-Conditioner in Building. International Journal of Smart Home, 9 (8). pp. 47-54. ISSN 1975-4094

de Almeida, Leandro and Monteiro Sales, Luis Carlos and Sodre, Jose Ricardo (2015) Fuel consumption and emissions from a vehicle operating with ethanol, gasoline and hydrogen produced on-board. International Journal of Hydrogen Energy, 40. pp. 6988-6994. ISSN 0360-3199

de Lima Ribeiro, Kamilla and Sodre, Jose Ricardo (2015) Henry’s constants for ethanol, iso-octane and gasoline absorption in engine lubricants. Lubrication Science, 27. pp. 231-239. ISSN 1557-6833

de Oliveira, Alex and de Morais, Andre Marcelino and Valente, Osmana Souza and Sodre, Jose Ricardo (2015) Combustion characteristics, performance and emissions from a diesel power generator fuelled by B7-ethanol blends. Fuel Processing Technology, 139. pp. 67-72. ISSN 0378-3820

Book Section

Stimson, Joshua and Ward, Michael and Docker, P. and Sutter, J. and Diaz-Moreno, S. (2015) Analytical Model for Heat Absorption: Lessons Learned From a One Dimensional Model. In: Proceedings - Synchrotron Radiation Instrumentation conference. SRI.

Ward, Michael (2015) Tool-less manufacture: Digital fabrication, 3D printing and the third industrial revolution. In: Handbook of Manufacturing Industries in the World Economy. Edward Elgar Publishing Ltd., pp. 100-108. ISBN 9781781003930 (ISBN); 9781781003923 (ISBN)

Yang, Junfeng and Tajudin, Zulhafiz and Coletti, Francesco and Muller, Erich and Macchietto, Sandro and Matar, O.K. (2015) Numerical Simulation of Fouling in Crude-Oil Heat Exchangers: The Interaction Between Different Fouling Routes. In: 2015 AIChE Annual Meeting Proceedings. AIChE. ISBN 978-0-8169-1094-6

Conference or Workshop Item

Annaz, Fawaz and Wazir, H.K (2015) Hardware-virtual environment integration. In: 5th Brunei International Conference on Engineering and Technology (BICET 2014), 1st-3rd November 2014, Brunei.

Annaz, Fawaz and Wazir, H.K (2015) Using unity for 3D object orientation in a virtual environment. In: 5th Brunei International Conference on Engineering and Technology (BICET 2014), 1st-3rd November 2014, Brunei.

Babu, Shiva and Chapman, C. and Raju, P. (2015) The Comparative Analysis of Design Automation Methods: Capabilities, Features and Technology Assessment. In: Advanced Design Concepts and Practice (ADCP) 2015 Workshop, Hangzhou, China.

Chapman, C. and Raju, P. (2015) Integrating Knowledge with System Models: A Knowledge Based Engineering Approach. In: 6th NASA/ESA International Workshop on Systems & Concurrent Engineering for Space Applications.

Chapman, C. and Raju, P. and Byrne, W. (2015) Semantic Location Models for Bioenergy and Biofuel Projects. In: The Ninth International Conference on Advances in Semantic Processing.

Higgison, G.H. and Neighbour, Gareth B (2015) Creating an Integrated Curriculum for a STEM Discipline. In: International Conference on New Perspectives in Science Education, Florence, Italy, March 2015.

Li, M. and Batmaz, F. and Guan, L. and Grigg, A. and Ingham, M. and Bull, P. (2015) Model-based systems engineering with requirements variability for embedded real-time systems. In: 5th International Model-Driven Requirements Engineering Workshop, MoDRE 2015, 24th August 2015, Ottawa, Canada.

Melville, L. (2015) Developing Decision Support for BioenNW, Bioenergy Networks and Biomass potential – Valorising European Biomass. In: International Conference, Sept 2015, Brussels.

Melville, L. (2015) The EnAlgae knowledge based decision support tool. In: EnAlgae Closeout Conference, Sept 2015, Brussels.

Melville, L. (2015) Sustainable Energy Provision. In: Sustainable Futures Forum, December 2015, Birmingham, UK.

Neighbour, Gareth B (2015) Carbon: Past and Future perspectives. In: The Many Faces of Carbon – Spring Meeting of the British Carbon Group, 16th April 2015, Southampton.

Neighbour, Gareth B (2015) Multi-scale structure / properties relationships in nuclear graphites at the workshop. In: Multi-scale structure & properties of bulk carbon materials: structure determination, physical & chemical properties characterisation, modelling from nm to m, 2015, Dresden.

Neighbour, Gareth B (2015) Nuclear Graphite: Past and Future perspectives. In: 5th Graphite & Graphene Conference, 8th-9th December 2015, Waldorf Hotel, London.

Sapkota, K. and Raju, P. and Byrne, W. and Chapman, C. (2015) Ontology-based economic models for bioenergy and biofuel projects. In: 9th IEEE International Conference on Semantic Computing, IEEE ICSC 2015, 7 February 2015 through 9 February 2015, Anaheim; United States.

Vijay, Venkatesh Chennam and Lees, M. and Chima, P. and Chapman, C. and Raju, P. (2015) Knowledge based educational framework for enhancing practical skills in engineering distance learners. In: IEEE Global Engineering Education Conference, 18 March 2015 through 20 March 2015, Tallinn University of Technology (TUT)Tallinn; Estonia.

This list was generated on Sat Feb 26 03:51:05 2022 UTC.

Research

In this section...