Items where Subject is "F200 Materials Science"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Number of items at this level: 29.

Article

Ahmed, Hafiz and Benbouzid, Mohamed (2021) Adaptive Observer-Based Grid-Synchronization and Sequence Extraction Techniques for Renewable Energy Systems: A Comparative Analysis. Applied Sciences, 11 (2). e653. ISSN 2076-3417

Babu, Shiva and Berry, Stuart and Ward, Michael and Krzyzanowski, Michal (2018) Numerical investigation of key stamping process parameters influencing tool life and wear. Procedia Manufacturing, 15. pp. 427-435. ISSN 2351-9789

Bajda, Szymon and Dymek, Stanislaw and Krzyzanowski, Michal and Retraint, Delphine and Majta, Janusz and Lisiecki, Lukasz and Kwiecien, Marcin (2018) Characterization of nanocrystallised multilayered metallic materials produced by the SMAT followed by constrained compression. Materials Characterization, 145. pp. 250-257. ISSN 1044-5803

Bajda, Szymon and Krzyzanowski, Michal (2019) Modelling aspects of laser cladding of bioactive glass coatings on ultrafine-grained titanium substrates. Computer Methods in Materials Science, 19 (3). pp. 138-149. ISSN 1641-8581

Bajda, Szymon and Liu, Yijun and Tosi, Riccardo and Cholewa-Kowalska, Katarzyna and Krzyzanowski, Michal and Dziadek, Michal and Kopyscianski, Mateusz and Dymek, Stanislaw and Polyakov, Alexander V. and Semenova, Irina P. and Tokarski, Tomasz (2021) Laser cladding of bioactive glass coating on pure titanium substrate with highly refined grain structure. Journal of Mechanical Behavior of Biomedical Materials. ISSN 1751-6161

Bajda, Szymon and Svyetlichnyy, Dmytro and Retraint, Delphine and Krzyzanowski, Michal (2018) Numerical modelling of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by duplex technique. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2893-2905. ISSN 0268-3768

Cooper, Frank (2021) Anglo-Saxon bling — a warrior king’s Golden Helmet. Gold Bulletin. ISSN 2190-7579

Danaher, S and Dudziak, T and Datta, P. K and Hasan, Reaz and Leung, P.S. (2013) Long-term oxidation of newly developed HIPIMS and PVD coatings with neural network prediction modelling. Corrosion Science, 69. pp. 322-337. ISSN 0010-938X

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) Investigation Of Natural Convection Characteristics With Brownian Motion Effect Using Different Nanofluids. Multiphase Sciences and Technology, 30 (2-3). pp. 135-152. ISSN 0276-1459

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2015) Investigation of Enhancement of Heat Transfer in Natural Convection Utilizing of Nanofluids. International Journal of Mechanical and Mechatronics Engineering, 9 (2). ISSN 2077-124X

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2017) Investigation of the Flow Characteristics of Titanium - Oxide - Water Nanofluid in Microchannel with Circular Cross Section. American Journal of Nano Research and Applications, 5 (6). pp. 102-109. ISSN 2575-3738

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) A New Effective Viscosity Model for Nanofluids. International Journal of Numerical Methods for Heat and Fluid Flow, 28 (3). pp. 571-583. ISSN 0961-5539

Etaig, Saleh and Hshem, Gamal and Hasan, Reaz and Perera, Noel (2019) Investigation of the Heat Performance for Hyper Nanofluid in a Co-Current Shell and Tube Heat Exchanger. International Journal of Engineering Research & Technology (IJERT), 8 (12). ISSN 2278-0181

Fancey, Kevin and Fazal, Adnan (2016) Prestressed polymeric matrix composites: Longevity aspects. Polymer Composites, 37 (7). pp. 2092-2097. ISSN 0272-8397

Fazal, Adnan and Fancey, Kevin (2014) UHMWPE fibre-based composites: Prestress-induced enhancement of impact properties. Composites Part B: Engineering, 66. pp. 1-6.

Ioannidou, Vasiliki G. and Arthur, Scott (2020) Experimental results of the hydrological performance of a permeable pavement laboratory rig. Journal of Water Supply: Research and Technology-AQUA. ISSN 0003-7214

Jankovic, Ljubomir (2016) Reducing Simulation Performance Gap in Hemp-Lime Buildings Using Fourier Filtering †. Sustainability, 8 (9). p. 864. ISSN 2071-1050

Krzyzanowski, Michal and Svyetlichnyy, Dmytro (2021) A Multiphysics Simulation Approach to Selective Laser Melting Modelling based on Cellular Automata and Lattice Boltzmann Methods. Computational Particle Mechanics. ISSN 2196-4386

Krzyzanowski, Michal and Svyetlichnyy, Dmytro and Bajda, Szymon (2021) Additive manufacturing of multi layered bioactive materials with improved mechanical properties: modelling aspects. Materials Science Forum, 1016. pp. 888-893. ISSN 1662-9752

Thakur, Nikhil and Raju, Pathmeswaran and Krzyzanowski, Michal and Chinchapatnam, Phani (2018) Logical Knowledge-based Advanced Cost Estimation Methodology (LKACEM) Applied to Metal Matrix Composite Aero-Engine Blisk. International Journal of Computer Science and Technology, 9 (2). pp. 53-65. ISSN 0976-8491

Book Section

Krzyzanowski, Michal and Beynon, John H. (2009) Interface Effects for Deformation Processes. In: Fundamentals of Modeling for Metals Processing. ASM International, pp. 127-143. ISBN 978-1-61503-001-9

Conference or Workshop Item

Bajda, Szymon and Krzyzanowski, Michal and Cholewa-Kowalska, Katarzyna and Dziadek, Michal and Tokarski, Tomasz (2019) Analysis of the porosity degree during laser-assisted cladding of bioactive glass on titanium substrates with highly refined grain structure. In: ANNIC 2019 Applied Nanotechnology and Nanoscience International Conference, November 18 - 20, 2019, Paris, France.

Bajda, Szymon and Liu, Yijun and Krzyzanowski, Michal and Dymek, Stanislaw (2019) Bioactive glass S520 laser cladding on ultrafine-grained pure titanium substrates. In: 30th Annual Conference of the European Society for Biomaterials ESB 2019, 9 - 13 September 2019, Dresden, Germany.

Cooper, Frank (2016) Do the New, Low-Cost Photopolymer 3D Printers Now Becoming Available Have a Place in the Jewelry Manufacturing Environment? In: Santa Fe Symposium, Albuquerque NM USA.

Cooper, Frank (2018) How Do You Replace The Irreplaceable? In: The Santa Fe Symposium, 20th - 23rd May 2018, Albuquerque New Mexico.

Fletcher, David and Cooper, Frank (2018) The Precious Project: Polishing and Finishing of Additive Manufacturing (AM) Jewelry. In: Thirty-Second Santa Fe Symposium, 20th - 23rd May 2018, Albuquerque New Mexico.

Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2018) Energy transfer including solid-liquid phase transformation aspects in modelling of additive layer manufacturing using Lattice Boltzmann-Cellular automata methods. In: ICCHMT 2018 International Conference on Computational Heat, Mass and Momentum Transfer, 21-24 May 2018, Cracow, Poland.

Book

Neighbour, Gareth B and Oraifige, I., eds. (2017) Thoughts and Reflections on the Use of Magnesium. Birmingham City University. ISBN 978-1-904839-90-3

Krzyzanowski, Michal and Beynon, John H. and Farrugia, Didier C. J. (2010) Oxide Scale Behavior in High Temperature Metal Processing. Wiley‐VCH Verlag GmbH & Co. KGaA. ISBN 9783527325184

This list was generated on Wed Jan 12 10:39:22 2022 UTC.

Research

In this section...