Items where Subject is "CAH10 - engineering and technology > CAH10-01 - engineering > CAH10-01-03 - production and manufacturing engineering"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Jump to: A | B | C | D | F | H | K | L | O | P | R | S | T | W
Number of items at this level: 32.


Alipooramirabad, Houman and Kianfar, Sina and Paradowska, Anna and Ghomashchi, Reza (2024) Residual stress measurement in engine block—an overview. International Journal of Advanced Manufacturing Technology, 131. ISSN 0268-3768

Ayinla, Kudirat (2021) Development of a semantic knowledge modelling approach for evaluating offsite manufacturing production processes. Doctoral thesis, Birmingham City University.


Babu, Shiva and Berry, Stuart and Ward, Michael and Krzyzanowski, Michal (2018) Numerical investigation of key stamping process parameters influencing tool life and wear. Procedia Manufacturing, 15. pp. 427-435. ISSN 2351-9789

Bailey, David (2018) Double Whammy Hits JLR. Birmingham City University, Birmingham.

Boateng, Prince and Omotayo, Temitope and Osunsanmi, Temidayo and Ekundayo, Damilola (2022) Socio-ecological risks management dynamic simulation in megaproject development of the Edinburgh Tram Network. International Journal of Building Pathology and Adaptation. ISSN 2398-4708


Caliskan, Aylin and Ozturkoglu, Omer and Ozturkoglu, Yucel (2022) Ranking of Responsible Automotive Manufacturers According to Sustainability Reports Using PROMETHEE and VIKOR Methods. Advanced Sustainable Systems. ISSN 2366-7486

Cooper, Frank (2021) Anglo-Saxon bling — a warrior king’s Golden Helmet. Gold Bulletin. ISSN 2190-7579


de Ruyter, A. and Hearne, David (2018) Ep. 4 - Brexit and the potential impact on Manfacturing (Collaboration with OpenText) - Podcast. [Audio]


Fancey, Kevin and Fazal, Adnan (2016) Prestressed polymeric matrix composites: Longevity aspects. Polymer Composites, 37 (7). pp. 2092-2097. ISSN 0272-8397

Feldman, Gerald (2015) Upgrade Decision Support Model (UDSM) for enterprise systems: drivers and processes. Doctoral thesis, Birmingham City University.

Fletcher, David and Cooper, Frank (2018) The Precious Project: Polishing and Finishing of Additive Manufacturing (AM) Jewelry. In: Thirty-Second Santa Fe Symposium, 20th - 23rd May 2018, Albuquerque New Mexico.


Hao, M. and Osman, K.A. and Boomer, D.R. and Newton, C.J. (1996) Developments in characterization of resistance spot welding of aluminum. Welding Journal (Miami, Fla), 75 (1). 1-s.

Hartl, Marco and Hogan, Joseph and Ioannidou, Vasiliki G. (2018) Treatment of Effluents from Meat, Vegetable and Soft Drinks Processing using Constructed Wetlands. In: Constructed Wetlands for Industrial Wastewater Treatment. Wiley. ISBN 9781119268376


Kalaitzi, Dimitra and Matopoulos, Aristides and Bourlakis, Michael and Tate, Wendy (2017) Supply chain strategies in an era of natural resource scarcity. International Journal of Operations and Production Management, 38 (3). pp. 784-809. ISSN 0144-3577

Kalaitzi, Dimitra and Matopoulos, Aristides and Bourlakis, Michael and Tate, Wendy (2019) Supply chains under resource pressure. International Journal of Operations and Production Management. ISSN 0144-3577

Kalaitzi, Dimitra and Matopoulos, Aristides and Clegg, Ben (2019) Managing resource dependencies in electric vehicle supply chains: a multi-tier case study. Supply Chain Management, 24 (2). pp. 256-270. ISSN 1359-8546

Krzyzanowski, Michal and Beynon, John H. (2009) Interface Effects for Deformation Processes. In: Fundamentals of Modeling for Metals Processing. ASM International, pp. 127-143. ISBN 978-1-61503-001-9

Krzyzanowski, Michal and Beynon, John H. and Farrugia, Didier C. J. (2010) Oxide Scale Behavior in High Temperature Metal Processing. Wiley‐VCH Verlag GmbH & Co. KGaA. ISBN 9783527325184


Li, Di and Geng, Ruoqi and Bancroft, John and Zhou, Zuoxin (2017) The impact of knowledge competences on business performance: Moderation effect of 3D printing implementation. In: POMS 29ᵗʰ ANNUAL CONFERENCE (May 4-7, 2018, Houston). (Unpublished)

Li, Di and Shishank, Shishank and de Ruyter, A. and Ali, Syed and Bailey, David and Hearne, David and Salh, Sukhwinder (2019) Brexit and the Auto Industry: Understanding the Issues for Supply Chain Management. In: Brexit Negotiations After Article 50: Assessing Process, Progress and Impact. Brexit Studies Series . Emerald Publishing Limited, pp. 173-191. ISBN 978-1-78769-768-3

Love, P.E.D. and Edwards, D.J. (2013) Curbing rework in offshore projects: systemic classification of risks with dialogue and narratives. Structure and Infrastructure Engineering, 9 (11). pp. 1118-1135. ISSN 15732479 (ISSN)


Olatunbosun, Samuel and Odediran, Sunday and Ekundayo, Damilola and Aigbavboa, Clinton (2023) Factors inhibiting energy access in the delivery of construction projects in Lagos Metropolis, Nigeria. International Journal of Construction Management. ISSN 1562-3599

Ozoemena, Matthew and Hasan, Reaz and Cheung, Wai Ming (2016) Analysis of Technology Improvement Opportunities for a 1.5MW Wind Turbine using a Hybrid Stochastic Approach in Life Cycle Assessment. Renewable Energy, 93 (August). pp. 369-382. ISSN 0960-1481


Pendry, Alan (2018) Magnesium Alloy Die Casting Process Improvement using the Single Minute Exchange of Dies (SMED) Method and Other Techniques. In: Mg2018: Proceedings of the 11th International Conference on Magnesium Alloys and Their Applications. Brunel University Press, UK, pp. 81-85. ISBN 9781908549372


Ravichandran, Mahadharsan and K.E.K, Vimal and Kumar, Vikas and Kulkarni, Onkar and Govindaswamy, Sundaramali and Kandasamy, Jayakrishna (2023) Environment and Economic analysis of reverse supply chain scenarios for remanufacturing using discrete-event simulation approach. Environment, Development and Sustainability. ISSN 1573-2975


Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2020) Development of Holistic Homogeneous Model of Selective Laser Melting based on Lattice Boltzmann Method: Qualitative Simulation. In: ICNAAM 2019 -17th International Conference of Numerical Analysis and Applied Mathematics, 23 - 28 September 2019, Rhodes, Greece.

Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2018) Energy transfer including solid-liquid phase transformation aspects in modelling of additive layer manufacturing using Lattice Boltzmann-Cellular automata methods. In: ICCHMT 2018 International Conference on Computational Heat, Mass and Momentum Transfer, 21-24 May 2018, Cracow, Poland.

Svyetlichnyy, Dmytro and Krzyzanowski, Michal and Lach, Lukasz and Straka, Robert. (2021) Development of homogeneous numerical platform for 3D through process simulation of selective laser melting considering changes of aggregative states. In: 13th International Conference on Computational Heat Mass and Momentum Transfer, May 18-21, 2021, Paris, France. (Unpublished)


Taylor, T. and Fourlaris, Georgios and Cafolla, J. (2016) Finite Element Modelling Full Vehicle Side Impact with Ultrahigh Strength Hot Stamped Steels. Journal of Materials Engineering and Performance, 25 (10). pp. 4495-4505. ISSN 1059-9495

Taylor, T. and Fourlaris, Georgios and Evans, P. (2016) Development of carbon–manganese–chromium steels for automotive hot stamping technologies. Materials Science and Technology, 33 (4). pp. 487-496. ISSN 0267-0836

Taylor, T. and Fourlaris, Georgios and Evans, P. and Bright, G. (2013) New generation ultrahigh strength boron steel for automotive hot stamping technologies. Materials Science and Technology, 30 (7). pp. 818-826. ISSN 0267-0836


Wang, F. and Ding, L. and Love, P.E.D. and Edwards, D.J. (2016) Modeling tunnel construction risk dynamics: Addressing the production versus protection problem. Safety Science, 87. pp. 101-115. ISSN 09257535 (ISSN)

This list was generated on Fri Jun 14 22:32:26 2024 UTC.


In this section...