Items where Subject is "H300 Mechanical Engineering"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Jump to: A | B | C | E | F | H | I | K | L | N | P | S | T | W
Number of items at this level: 44.

A

Adamaki, V. and Minster, T. and Thomas, T. and Fourlaris, Georgios and Bowen, C.R. (2016) Study of the mechanical properties of Ti₂AlC after thermal shock. Materials Science and Engineering: A, 667. pp. 9-15. ISSN 0921-5093

Al-Neama, Ahmed F. and Khatir, Zinedine and Kapur, Nikkil and Summers, Johnathan and Thompson, Harvey M. (2018) An experimental and numerical investigation of chevron fin structures in serpentine minichannel heat sinks. International Journal of Heat and Mass Transfer, 120 (May 18). pp. 1213-1228. ISSN 0017-9310

Annaz, Fawaz (2020) Force Equalisation in Torque-Summed Electromechanical Actuators. Measurement, 156 (2020). p. 107600. ISSN 0263-2241

B

Babu, Shiva and Berry, Stuart and Ward, Michael and Krzyzanowski, Michal (2018) Numerical investigation of key stamping process parameters influencing tool life and wear. Procedia Manufacturing, 15. pp. 427-435. ISSN 2351-9789

Bajda, Szymon and Dymek, Stanislaw and Krzyzanowski, Michal and Retraint, Delphine and Majta, Janusz and Lisiecki, Lukasz and Kwiecien, Marcin (2018) Characterization of nanocrystallised multilayered metallic materials produced by the SMAT followed by constrained compression. Materials Characterization, 145. pp. 250-257. ISSN 1044-5803

Bajda, Szymon and Krzyzanowski, Michal (2019) Modelling aspects of laser cladding of bioactive glass coatings on ultrafine-grained titanium substrates. Computer Methods in Materials Science, 19 (3). pp. 138-149. ISSN 1641-8581

Bajda, Szymon and Svyetlichnyy, Dmytro and Retraint, Delphine and Krzyzanowski, Michal (2018) Numerical modelling of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by duplex technique. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2893-2905. ISSN 0268-3768

C

Cornish, Richard (2018) Evidence based lightweight car body responses. In: International Forum Automotive Acoustics and Vibration, 25 to 26 September 2018, National Conference Centre Birmingham.

E

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) Investigation Of Natural Convection Characteristics With Brownian Motion Effect Using Different Nanofluids. Multiphase Sciences and Technology, 30 (2-3). pp. 135-152. ISSN 0276-1459

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2015) Investigation of Enhancement of Heat Transfer in Natural Convection Utilizing of Nanofluids. International Journal of Mechanical and Mechatronics Engineering, 9 (2). ISSN 2077-124X

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2017) Investigation of the Flow Characteristics of Titanium - Oxide - Water Nanofluid in Microchannel with Circular Cross Section. American Journal of Nano Research and Applications, 5 (6). pp. 102-109. ISSN 2575-3738

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) A New Effective Viscosity Model for Nanofluids. International Journal of Numerical Methods for Heat and Fluid Flow, 28 (3). pp. 571-583. ISSN 0961-5539

Etaig, Saleh and Hshem, Gamal and Hasan, Reaz and Perera, Noel (2019) Investigation of the Heat Performance for Hyper Nanofluid in a Co-Current Shell and Tube Heat Exchanger. International Journal of Engineering Research & Technology (IJERT), 8 (12). ISSN 2278-0181

F

Fan, Y L and Perera, Noel and Tan, Kian (2019) An integrated experimental and numerical method to assess the fatigue performance of recycled rail. Journal of Mechanical Engineeering and Sciences, 13 (4). pp. 5988-6006. ISSN 2289-4659

Filimonov, Maxim and Oraifige, Ilias and Vijay, Venkatesh Chennam (2020) A novel graph-based modelling approach for reducing complexity in model-based systems engineering environment. International Journal of System of Systems Engineering, 10 (2). ISSN 1748-0671

H

Hamad, Hazim S. and Kapur, Nik and Khatir, Zinedine and Querin, O.M. and Thompson, Harvey M. and Wang, Yongxing and Wilson, Mark (2020) Computational fluid dynamics analysis and optimisation of polymerase chain reaction thermal flow systems. Applied Thermal Engineering, 183 (116122). ISSN 1359-4311

Hao, M. and Osman, K.A. and Boomer, D.R. and Newton, C.J. (1996) Developments in characterization of resistance spot welding of aluminum. Welding Journal (Miami, Fla), 75 (1). 1-s.

I

Iyi, D. and Hasan, Reaz and Penlington, Roger (2018) Experimental and numerical study of Buoyancy-driven low turbulence flow in rectangular enclosure partially filled with isolated solid blockages. International Journal of Heat and Mass Transfer, 127 (B). pp. 534-545. ISSN 0017-9310

Iyi, Draco and Hasan, Reaz and Underwood, Chris and Penlington, Roger (2014) Double skin façade: Modelling technique and influence of venetian blinds on the airflow and heat transfer. Applied Thermal Engineering, 71 (1). pp. 219-229. ISSN 1359-4311

K

Khatir, Zinedine and Hanson, Bruce and Fairweather, Michael and Peter J., Heggs (2017) CFD Analysis of Liquid-Liquid Extraction Pulsed Sieve-Plate Extraction Columns. In: 27th European Symposium on Computer Aided Process Engineering, 1st-5th October 2017, Barcelona, Spain.

Khatir, Zinedine and Kubiak, K.J. and Jimack, P.K. and Mathia, T.G. (2016) Dropwise condensation heat transfer process optimisation on superhydrophobic surfaces using a multi-disciplinary approach. Applied Thermal Engineering, 106 (5/8/16). pp. 1337-1344. ISSN 1359-4311

Khatir, Zinedine and Taherkhani, Ali Reza and Paton, Joe and Thompson, Harvey and Kapur, Nik and Toropov, Vassili (2015) Energy thermal management in commercial bread-baking using a multi-objective optimisation framework. Applied Thermal Engineering, 80 (5/4/15). pp. 141-149. ISSN 1359-4311

Krzyzanowski, Michal and Alaswad, Abed and Rentzelas, Panagiotis and Mavritsaki, Eirini and Leyland, Laura and Sodre, Jose Ricardo and Annaz, Fawaz and Pendry, Alan and Shaw, Clayton and Cornish, Richard (2017) BCU Magnesium Symposium 2017 Abstract Booklet. In: The BCU Magnesium Symposium, Thursday 20 July 2017, Birmingham City University. (Unpublished)

Krzyzanowski, Michal and Beynon, John H. (2009) Interface Effects for Deformation Processes. In: Fundamentals of Modeling for Metals Processing. ASM International, pp. 127-143. ISBN 978-1-61503-001-9

Krzyzanowski, Michal and Beynon, John H. and Farrugia, Didier C. J. (2010) Oxide Scale Behavior in High Temperature Metal Processing. Wiley‐VCH Verlag GmbH & Co. KGaA. ISBN 9783527325184

Krzyzanowski, Michal and Svyetlichnyy, Dmytro (2021) A Multiphysics Simulation Approach to Selective Laser Melting Modelling based on Cellular Automata and Lattice Boltzmann Methods. Computational Particle Mechanics. ISSN 2196-4386

Krzyzanowski, Michal and Svyetlichnyy, Dmytro and Bajda, Szymon (2021) Additive manufacturing of multi layered bioactive materials with improved mechanical properties: modelling aspects. Materials Science Forum, 1016. pp. 888-893. ISSN 1662-9752

Kulkarni, S.S. and Edwards, D.J. and Pärn, E.A. and Chapman, C. and Aigbavboa, C. and Cornish, R. (2018) Evaluation of vehicle lightweighting to reduce greenhouse gas emissions with focus on magnesium substitution. Journal of Engineering, Design and Technology, 16 (6). pp. 869-888. ISSN 1726-0531

Kulkarni, Siddharth Suhas (2016) Design study of a horizontal axis tidal turbine blade. Doctoral thesis, Birmingham City University.

L

Lahr, Jens (2016) Experimental and computational analysis of oil flow in cooling galleries of diesel engine pistons. Doctoral thesis, Birmingham City University.

N

Naylor, Andrew and Hackney, Philip and Perera, Noel and Clahr, Emil (2012) A predictive model for the cutting force in wood machining developed using mechanical properties. Bioresources, 7 (3). pp. 2883-2894. ISSN 1930-2126

P

Perera, Noel (2019) Sustainable energy, engineering, materials and environment: current advances and challenges. Environmental Science and Pollution Research. ISSN 0944-1344

S

Samuels, P. (2016) Developing Extended Real and Virtual Robotics Enhancement Classes with Years 10-13. In: Mathematics and Education – Learning, Technology and Assessment: Festschrift in honour of Lenni Haapasalo. WTM-Verlag, Munster, pp. 101-115. ISBN 9783959870054

Samuels, P. and Poppa, S. (2016) Developing extended real and virtual robotics enhancement classes with years 10-13. In: Robotics in Education: Research and practices for robotics in STEM education. Advances in Intelligent Systems and Computing (457). Springer Verlag, Berlin, pp. 69-81. ISBN 978-3-319-42975-5

Stimson, Joshua (2019) Thermomechanical Analysis and Development of a Novel Monochromator First Crystal Using an Interference Fit: A complete redesign of first crystal assemblies from first principles. Doctoral thesis, Birmingham City University.

Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2020) Development of Holistic Homogeneous Model of Selective Laser Melting based on Lattice Boltzmann Method: Qualitative Simulation. In: ICNAAM 2019 -17th International Conference of Numerical Analysis and Applied Mathematics, 23 - 28 September 2019, Rhodes, Greece.

Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2018) Energy transfer including solid-liquid phase transformation aspects in modelling of additive layer manufacturing using Lattice Boltzmann-Cellular automata methods. In: ICCHMT 2018 International Conference on Computational Heat, Mass and Momentum Transfer, 21-24 May 2018, Cracow, Poland.

Svyetlichnyy, Dmytro and Krzyzanowski, Michal and Lach, Lukasz and Straka, Robert. (2021) Development of homogeneous numerical platform for 3D through process simulation of selective laser melting considering changes of aggregative states. In: 13th International Conference on Computational Heat Mass and Momentum Transfer, May 18-21, 2021, Paris, France. (In Press)

Sykes, Thomas C. and Castrejón-Pita, Alfonso A. and Castrejón-Pita, J. Rafael and Harbottle, David and Khatir, Zinedine and Thompson, Harvey M. and Wilson, Mark (2020) Surface jets and internal mixing during the coalescence of impacting and sessile droplets. Phys. Rev. Fluids, 5 (023602). ISSN 2469-990X

T

Taylor, T. and Danks, S. and Fourlaris, Georgios (2016) Dynamic Tensile Testing of Ultrahigh Strength Hot Stamped Martensitic Steels. Steel Research International, 88 (3). ISSN 1611-3683

Taylor, T. and Fourlaris, Georgios and Cafolla, J. (2016) Finite Element Modelling Full Vehicle Side Impact with Ultrahigh Strength Hot Stamped Steels. Journal of Materials Engineering and Performance, 25 (10). pp. 4495-4505. ISSN 1059-9495

Taylor, T. and Fourlaris, Georgios and Evans, P. (2016) Development of carbon–manganese–chromium steels for automotive hot stamping technologies. Materials Science and Technology, 33 (4). pp. 487-496. ISSN 0267-0836

W

Whipps, Stuart (2020) The Kipper and The Corpse. [Show/Exhibition]

Williams, Andrew Robert (2019) Quantification of plausibility cross-checks in safety related control system architecture design for automotive applications. Doctoral thesis, Birmingham City University.

This list was generated on Wed Jan 12 10:02:56 2022 UTC.

Research

In this section...