Items where Division is "Faculty of Computing, Engineering and the Built Environment > School of Engineering and the Built Environment > Dept. of Engineering" and Year is 2018

Up a level
Export as [feed] RSS
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | H | K | L | N | S | T
Number of items: 18.

A

Al-Neama, Ahmed F. and Khatir, Zinedine and Kapur, Nikkil and Summers, Johnathan and Thompson, Harvey M. (2018) An experimental and numerical investigation of chevron fin structures in serpentine minichannel heat sinks. International Journal of Heat and Mass Transfer, 120 (May 18). pp. 1213-1228. ISSN 0017-9310

B

Babu, Shiva and Berry, Stuart and Ward, Michael and Krzyzanowski, Michal (2018) Numerical investigation of key stamping process parameters influencing tool life and wear. Procedia Manufacturing, 15. pp. 427-435. ISSN 2351-9789

Bajda, Szymon and Dymek, Stanislaw and Krzyzanowski, Michal and Retraint, Delphine and Majta, Janusz and Lisiecki, Lukasz and Kwiecien, Marcin (2018) Characterization of nanocrystallised multilayered metallic materials produced by the SMAT followed by constrained compression. Materials Characterization, 145. pp. 250-257. ISSN 1044-5803

Bajda, Szymon and Svyetlichnyy, Dmytro and Retraint, Delphine and Krzyzanowski, Michal (2018) Numerical modelling of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by duplex technique. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2893-2905. ISSN 0268-3768

C

Cornish, Richard (2018) Evidence based lightweight car body responses. In: International Forum Automotive Acoustics and Vibration, 25 to 26 September 2018, National Conference Centre Birmingham.

Cornish, Richard (2018) Interior noise and electric vehicles-an experimental survey. In: Electric Vehicle NVH - not as quiet as you thought?, June 21st 2018, Coventry. (Unpublished)

D

de Oliveira, Mario A. and Monteiro, Andre and Vieira Filho, Jozue (2018) A New Structural Health Monitoring Strategy Based on PZT Sensors and Convolutional Neural Network. Sensors, 18 (9). p. 2955. ISSN 1424-8220

H

Hu, Shiyuan and Gao, Jinliang , and Wu, Wenyan (2018) Experiment and Simulation of Ferrous Ions Diffusion at the Dead-end Branch Pipes of Water Distribution System. In: International Joint Conference in Water Distribution Systems Analysis & Computing and Control in the Water Industry, 23-25 July 2018, Kingston Ontario Canada.

K

Krzyzanowski, Michal and Retraint, Delphine and Bajda, Szymon (2018) Interfacial oxidation in processing of nanocrystallised metallic materials using duplex technique - experimental and modelling aspects. In: European Oxide Scale Conference (OXI 2018), 11 December 2018 - 12 December 2018, The Institute of Materials, Minerals and Mining IOM3, London, UK.

L

Li, Tian and Hemida, Hassan and Zhang, Jiye and Rashidi, Mohammad and Flynn, Dominic (2018) Comparisons of Shear Stress Transport and Detached Eddy Simulations of the Flow Around Trains. Journal of Fluids Engineering, 140 (11). ISSN 0098-2202

Li, Yuanzhe and Gao, Jinliang and Wu, Wenyan (2018) Leakage discharge separation in multi-leaks pipe networks based on improved Independent Component Analysis with Reference (ICA-R) algorithm. In: International Joint Conference in Water Distribution Systems Analysis & Computing and Control in the Water Industry, 23-25 July 2018, Kingston Ontario Canada.

N

Noce, Toshizaemom and da Silva, Rafael Rocha and Morais, Rafael and Monteio Sales, Luis Carlos and Hanriot, Sergio de Morais and Sodre, Jose Ricardo (2018) Energy factors for flexible fuel engines and vehicles operating with gasoline-ethanol blends. Transportation Research Part D: Transport and Environment, 65. pp. 368-374. ISSN 1361-9209

S

Soper, David and Flynn, Dominic and Baker, Chris and Jackson, Adam and Hemida, Hassan (2018) A comparative study of methods to simulate aerodynamic flow beneath a high-speed train. Proceedings of the Institution of Mechanical Engineers, part F: Journal of Rail and Rapid Transit, 232 (5). pp. 1464-1482. ISSN 0954-4097

Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2018) Energy transfer including solid-liquid phase transformation aspects in modelling of additive layer manufacturing using Lattice Boltzmann-Cellular automata methods. In: ICCHMT 2018 International Conference on Computational Heat, Mass and Momentum Transfer, 21-24 May 2018, Cracow, Poland.

Svyetlichnyy, Dmytro and Krzyzanowski, Michal and Straka, R. and Lach, L. and Rainforth, W. Mark (2018) Application of Cellular Automata and Lattice Boltzmann Methods for modelling of Additive Layer Manufacturing. International Journal of Numerical Methods for Heat and Fluid Flow, 28 (1). pp. 31-46. ISSN 0961-5539

T

Tang, Zhaozhao and Wu, Wenyan and Gao, Jinliang and Yang, Po (2018) Feasibility Study on Wireless Passive SAW Sensor in IoT enabled Water Distribution System,. In: Internet of Things (iThings) and IEEE Green Computing and Communications (GreenCom) and IEEE Cyber, Physical and Social Computing (CPSCom) and IEEE Smart Data (SmartData), 2017 IEEE International Conference on. IEEE, pp. 830-834. ISBN 978-1-5386-3066-2

Tang, Zhaozhao and Wu, Wenyan and Gao, Jinliang and Yang, Po (2018) SAW Delay Line based Smart Sensing in Water Distribution System. In: The 16th IEEE International Conference on Smart City (SmartCity-2018), Exeter UK.

Thakur, Nikhil and Raju, Pathmeswaran and Krzyzanowski, Michal and Chinchapatnam, Phani (2018) Logical Knowledge-based Advanced Cost Estimation Methodology (LKACEM) Applied to Metal Matrix Composite Aero-Engine Blisk. International Journal of Computer Science and Technology, 9 (2). pp. 53-65.

This list was generated on Sun Jun 16 19:47:36 2024 UTC.

Research

In this section...