Items where Subject is "CAH10-03-02 - materials technology"
- Subjects (8127)
- CAH10 - engineering and technology (687)
- CAH10-03 - materials and technology (91)
- CAH10-03-02 - materials technology (39)
- CAH10-03 - materials and technology (91)
- CAH10 - engineering and technology (687)
B
Babu, Shiva and Berry, Stuart and Ward, Michael and Krzyzanowski, Michal (2018) Numerical investigation of key stamping process parameters influencing tool life and wear. Procedia Manufacturing, 15. pp. 427-435. ISSN 2351-9789
Bajda, Szymon and Dymek, Stanislaw and Krzyzanowski, Michal and Retraint, Delphine and Majta, Janusz and Lisiecki, Lukasz and Kwiecien, Marcin (2018) Characterization of nanocrystallised multilayered metallic materials produced by the SMAT followed by constrained compression. Materials Characterization, 145. pp. 250-257. ISSN 1044-5803
Bajda, Szymon and Krzyzanowski, Michal (2019) Modelling aspects of laser cladding of bioactive glass coatings on ultrafine-grained titanium substrates. Computer Methods in Materials Science, 19 (3). pp. 138-149. ISSN 1641-8581
Bajda, Szymon and Krzyzanowski, Michal and Cholewa-Kowalska, Katarzyna and Dziadek, Michal and Tokarski, Tomasz (2019) Analysis of the porosity degree during laser-assisted cladding of bioactive glass on titanium substrates with highly refined grain structure. In: ANNIC 2019 Applied Nanotechnology and Nanoscience International Conference, November 18 - 20, 2019, Paris, France.
Bajda, Szymon and Liu, Yijun and Tosi, Riccardo and Cholewa-Kowalska, Katarzyna and Krzyzanowski, Michal and Dziadek, Michal and Kopyscianski, Mateusz and Dymek, Stanislaw and Polyakov, Alexander V. and Semenova, Irina P. and Tokarski, Tomasz (2021) Laser cladding of bioactive glass coating on pure titanium substrate with highly refined grain structure. Journal of Mechanical Behavior of Biomedical Materials. ISSN 1751-6161
Bajda, Szymon and Svyetlichnyy, Dmytro and Retraint, Delphine and Krzyzanowski, Michal (2018) Numerical modelling of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by duplex technique. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2893-2905. ISSN 0268-3768
C
Cooper, Frank (2021) Anglo-Saxon bling — a warrior king’s Golden Helmet. Gold Bulletin. ISSN 2190-7579
Cooper, Frank (2016) Do the New, Low-Cost Photopolymer 3D Printers Now Becoming Available Have a Place in the Jewelry Manufacturing Environment? In: Santa Fe Symposium, Albuquerque NM USA.
Cooper, Frank (2018) How Do You Replace The Irreplaceable? In: The Santa Fe Symposium, 20th - 23rd May 2018, Albuquerque New Mexico.
D
Danaher, S and Dudziak, T and Datta, P. K and Hasan, Reaz and Leung, P.S. (2013) Long-term oxidation of newly developed HIPIMS and PVD coatings with neural network prediction modelling. Corrosion Science, 69. pp. 322-337. ISSN 0010-938X
Downey, Anthony (2017) “Scopic Reflections: Incoming and the Technology of Exceptionalism", catalogue published on the occasion of Richard Mosse: Incoming, 15 February – 23 April 2017, published in 2017 by Barbican Curve Gallery, London EC2Y 8DS United Kingdom. ISBN 978 0 9957082 0 4. Barbican Curve Series, 27 (n/a). Barbican Gallery, London, UK, pp. 21-25. ISBN ISBN 978 0 9957082 0 4
F
Fan, Y L and Perera, Noel and Tan, Kian (2019) An integrated experimental and numerical method to assess the fatigue performance of recycled rail. Journal of Mechanical Engineeering and Sciences, 13 (4). pp. 5988-6006. ISSN 2289-4659
Fazal, Adnan and Fancey, Kevin (2014) UHMWPE fibre-based composites: Prestress-induced enhancement of impact properties. Composites Part B: Engineering, 66. pp. 1-6.
Fazal, Adnan and Hao, M. and Chen, G. and Vaughan, A.S. and Cao, J. and Wang, H. (2016) The impacts of the temperature and electric field on the electrical characteristics in semicon-bonded XLPE insulation. In: 2016 IEEE International Conference on High Voltage Engineering and Application (ICHVE). IEEE. ISBN 978-1-5090-0496-6
Fazal, Adnan and Hao, M. and Vaughan, A.S. and Chen, G and Cao, J. and Wang, H. (2016) The effect of electrode material and semicon bonding on space charge dynamics of XLPE. In: 2016 IEEE International Conference on Dielectrics (ICD). IEEE. ISBN 978-1-5090-2804-7
Fazal, Adnan and Hao, M. and Vaughan, A.S. and Chen, G. and Cao, J. and Wang, H. (2016) The effect of composition and processing on electric characteristics of XLPE in HVDC cable applications. In: 2016 IEEE Electrical Insulation Conference (EIC). IEEE, pp. 440-443. ISBN 978-1-4673-8706-4
Fazal, Adnan and Hao, M. and Vaughan, A.S. and Chen, G. and Zhou, Y. and Zhang, C. (2016) The impacts of degassing on space charge characteristics and DC conductivity in semicon-bonded XLPE for HVDC cable applications. In: 2016 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). IEEE, pp. 97-100. ISBN 978-1-5090-4654-6
Fazal, Adnan and Hao, M. and Vaughan, Alun and Chen, G. and Wang, H. and Zhang, C. and Zhou, Y. (2016) The effects of semicon on space charge behavior under different temperature conditions for HVDC cable insulation. In: 2nd International Conference on HVDC - (HVDC2016), 25th - 27th October 2016, China.
Fletcher, David and Cooper, Frank (2018) The Precious Project: Polishing and Finishing of Additive Manufacturing (AM) Jewelry. In: Thirty-Second Santa Fe Symposium, 20th - 23rd May 2018, Albuquerque New Mexico.
H
Hindle, Sian (2024) Jewellery’s Circular Economy: Materialising connections through the gifting and wearing of adornments. Journal of Jewellery Research. ISSN 2516-337X
I
Ioannidou, Vasiliki G. and Arthur, Scott (2020) Experimental results of the hydrological performance of a permeable pavement laboratory rig. Journal of Water Supply: Research and Technology-AQUA. ISSN 0003-7214
Ioannidou, Vasiliki G. and Pearson, J.M (2019) The effects of flow rate variation and vegetation ageing on the longitudinal mixing and Residence Time Distribution (RTD) in a full-scale constructed wetland. Ecological Engineering, 138 (Nov-19). pp. 248-263. ISSN 0925-8574
K
Khosravani, Mohammad Reza and Soltani, Payam and Reinicke, Tamara (2023) Effects of steps on the load bearing capacity of 3D-printed single lap joints. Journal of Materials Research and Technology, 23. pp. 1834-1847. ISSN 2214-0697
Krzyzanowski, Michal and Alaswad, Abed and Rentzelas, Panagiotis and Mavritsaki, Eirini and Leyland, Laura and Sodre, Jose Ricardo and Annaz, Fawaz and Pendry, Alan and Shaw, Clayton and Cornish, Richard (2017) BCU Magnesium Symposium 2017 Abstract Booklet. In: The BCU Magnesium Symposium, Thursday 20 July 2017, Birmingham City University. (Unpublished)
Krzyzanowski, Michal and Beynon, John H. (2009) Interface Effects for Deformation Processes. In: Fundamentals of Modeling for Metals Processing. ASM International, pp. 127-143. ISBN 978-1-61503-001-9
Krzyzanowski, Michal and Beynon, John H. and Farrugia, Didier C. J. (2010) Oxide Scale Behavior in High Temperature Metal Processing. Wiley‐VCH Verlag GmbH & Co. KGaA. ISBN 9783527325184
Krzyzanowski, Michal and Retraint, Delphine and Bajda, Szymon (2018) Interfacial oxidation in processing of nanocrystallised metallic materials using duplex technique - experimental and modelling aspects. In: European Oxide Scale Conference (OXI 2018), 11 December 2018 - 12 December 2018, The Institute of Materials, Minerals and Mining IOM3, London, UK.
N
Naemi, R. and Healy, A. and Dunning, D. and Ashford, Robert L. and Chatzistergos, P. and Chockalingam, N. (2013) Peak and average pressure correlations and their ratio at different plantar regions of the foot. Footwear Science, 5 (SUPPL.). S96-S98. ISSN 19424280 (ISSN)
P
Paudyal, Bharat (2023) Multimodal Interaction Techniques for Disabled Developers. Doctoral thesis, Birmingham City University.
R
Rajapakse, Dilusha (2019) An investigation of the activation of multi-colour changing photochromic textiles. Journal of Textiles and Engineer (Tekstil ve Mühendis), 26 (114). pp. 196-208. ISSN 1300-7599
S
Svyetlichnyy, Dmytro and Bajda, Szymon and Krzyzanowski, Michal (2023) An extended laser beam heating model for a numerical platform to simulate multi‑material selective laser melting. Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2020) Development of Holistic Homogeneous Model of Selective Laser Melting based on Lattice Boltzmann Method: Qualitative Simulation. In: ICNAAM 2019 -17th International Conference of Numerical Analysis and Applied Mathematics, 23 - 28 September 2019, Rhodes, Greece.
Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2018) Energy transfer including solid-liquid phase transformation aspects in modelling of additive layer manufacturing using Lattice Boltzmann-Cellular automata methods. In: ICCHMT 2018 International Conference on Computational Heat, Mass and Momentum Transfer, 21-24 May 2018, Cracow, Poland.
Svyetlichnyy, Dmytro and Krzyzanowski, Michal and Lach, Lukasz and Straka, Robert. (2021) Development of homogeneous numerical platform for 3D through process simulation of selective laser melting considering changes of aggregative states. In: 13th International Conference on Computational Heat Mass and Momentum Transfer, May 18-21, 2021, Paris, France. (Unpublished)
T
Tavousi, Ebrahim and Perera, Noel and Flynn, Dominic and Hasan, Reaz (2023) Numerical Investigation of Heat Transfer and Fluid Flow Characteristics of Al2O3 Nanofluid In A Double Tube Heat Exchanger With Turbulator Insertion. In: 9th World Congress on Mechanical, Chemical, and Material Engineering (MCM'23) Brunel University, London, United Kingdom –August 06-08, 2023, 6th - 8th August 2023, London, England.
Taylor, T. and Danks, S. and Fourlaris, Georgios (2016) Dynamic Tensile Testing of Ultrahigh Strength Hot Stamped Martensitic Steels. Steel Research International, 88 (3). ISSN 1611-3683
Taylor, T. and Fourlaris, Georgios and Evans, P. (2016) Development of carbon–manganese–chromium steels for automotive hot stamping technologies. Materials Science and Technology, 33 (4). pp. 487-496. ISSN 0267-0836
Taylor, T. and Fourlaris, Georgios and Evans, P. and Bright, G. (2013) New generation ultrahigh strength boron steel for automotive hot stamping technologies. Materials Science and Technology, 30 (7). pp. 818-826. ISSN 0267-0836