CFD-Enabled Optimization of Polymerase Chain Reaction Thermal Flow Systems

Hamad, Hazim S. and Kapur, N. and Khatir, Zinedine and Querin, Osvaldo and Thompson, H. M. and Wilson, M. C. T. (2021) CFD-Enabled Optimization of Polymerase Chain Reaction Thermal Flow Systems. In: 16th UK Heat Transfer Conference (UKHTC2019), 8th - 10th September 2019, University of Nottingham.

[img]
Preview
Text
H.S. Hamad, Kapur N., Z. Khatir., O. Querin, H.M. Thompson H.M., M.C.T. WilsonSpringerNatureChapter70-submitted-Eproof.pdf - Accepted Version

Download (3MB)

Abstract

Microfluidic flow systems with precise thermal control are required in many important practical applications, such as in heat sink cooling of electronics, droplet freezing systems to determine environmental pollution levels and in efficient chemical processing [1, 2, 3]. This study focuses on the thermal microfluidic flows arising in Polymerase Chain Reaction (PCR) thermal cycling systems used for rapid diagnostic screening and testing [4]. PCR systems have been widely studied and numerous design features have been proposed to regulate the temperature distribution to provide the required thermal environment for effective amplification of DNA needed to complete the process [3]. Microfluidics are very useful for such systems since they can reduce the reagent consumption and the thermal mass, which enables the temperature to be manipulated rapidly within the various temperature zones needed for the denaturation, annealing, and extension components of the PCR process. Computational Fluid Dynamics is used to explore the effect of microfluidic geometry and operating conditions on the thermal and hydraulic conditions within each of the three temperature zones. COMSOL Multiphysics® 5.4 coupled with MATLAB codes are used to solve a novel series of optimization problems that enable the most effective thermal conditions for the process of DNA amplification to be identified. The study focuses on a prototype serpentine microfluidic geometry that enables multiple cycles of denaturation, annealing, and extension to be carried out within a single microfluidic chip.

Item Type: Conference or Workshop Item (Paper)
Identification Number: https://doi.org/10.1007/978-981-33-4765-6_70
Dates:
DateEvent
1 June 2021Accepted
2 June 2021Published Online
Subjects: CAH10 - engineering and technology > CAH10-01 - engineering > CAH10-01-01 - engineering (non-specific)
Divisions: Faculty of Computing, Engineering and the Built Environment > School of Engineering and the Built Environment
Depositing User: Zinedine Khatir
Date Deposited: 24 Jun 2021 15:07
Last Modified: 02 Jun 2022 03:00
URI: https://www.open-access.bcu.ac.uk/id/eprint/11824

Actions (login required)

View Item View Item

Research

In this section...