Items where Subject is "CAH10-03-07 - materials science"

Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | I | J | K | P | S | T
Number of items at this level: 37.

A

Ahmed, Hafiz and Benbouzid, Mohamed (2021) Adaptive Observer-Based Grid-Synchronization and Sequence Extraction Techniques for Renewable Energy Systems: A Comparative Analysis. Applied Sciences, 11 (2). e653. ISSN 2076-3417

B

Babu, Shiva and Berry, Stuart and Ward, Michael and Krzyzanowski, Michal (2018) Numerical investigation of key stamping process parameters influencing tool life and wear. Procedia Manufacturing, 15. pp. 427-435. ISSN 2351-9789

Bajda, Szymon and Cholewa-Kowalska, Katarzyna and Krzyzanowski, Michal and Dziadek, Michal and Kopyscianski, Mateusz and Liu, Yijun and Rai, Adarsh (2024) Laser-directed energy deposition of bioactive glass on Ti-6Al-7Nb titanium alloy substrate with highly refined grain structure. Surface & Coatings Technology, 485. p. 130904. ISSN 0257-8972

Bajda, Szymon and Dymek, Stanislaw and Krzyzanowski, Michal and Retraint, Delphine and Majta, Janusz and Lisiecki, Lukasz and Kwiecien, Marcin (2018) Characterization of nanocrystallised multilayered metallic materials produced by the SMAT followed by constrained compression. Materials Characterization, 145. pp. 250-257. ISSN 1044-5803

Bajda, Szymon and Krzyzanowski, Michal (2019) Modelling aspects of laser cladding of bioactive glass coatings on ultrafine-grained titanium substrates. Computer Methods in Materials Science, 19 (3). pp. 138-149. ISSN 1641-8581

Bajda, Szymon and Krzyzanowski, Michal and Cholewa-Kowalska, Katarzyna and Dziadek, Michal and Tokarski, Tomasz (2019) Analysis of the porosity degree during laser-assisted cladding of bioactive glass on titanium substrates with highly refined grain structure. In: ANNIC 2019 Applied Nanotechnology and Nanoscience International Conference, November 18 - 20, 2019, Paris, France.

Bajda, Szymon and Liu, Yijun and Krzyzanowski, Michal and Dymek, Stanislaw (2019) Bioactive glass S520 laser cladding on ultrafine-grained pure titanium substrates. In: 30th Annual Conference of the European Society for Biomaterials ESB 2019, 9 - 13 September 2019, Dresden, Germany.

Bajda, Szymon and Liu, Yijun and Tosi, Riccardo and Cholewa-Kowalska, Katarzyna and Krzyzanowski, Michal and Dziadek, Michal and Kopyscianski, Mateusz and Dymek, Stanislaw and Polyakov, Alexander V. and Semenova, Irina P. and Tokarski, Tomasz (2021) Laser cladding of bioactive glass coating on pure titanium substrate with highly refined grain structure. Journal of Mechanical Behavior of Biomedical Materials. ISSN 1751-6161

Bajda, Szymon and Svyetlichnyy, Dmytro and Retraint, Delphine and Krzyzanowski, Michal (2018) Numerical modelling of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by duplex technique. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2893-2905. ISSN 0268-3768

Baniamerian, Zahra and Jafari, Amir Sadra and Perera, Noel (2022) Effects of pressurization on the Enthalpy of vaporization for the SiO2 nanofluid. Physical Chemistry Chemical Physics, 25. pp. 673-683. ISSN 1463-9076

C

Colombo, Mattia and Dolhasz, Alan and Hockman, Jason and Harvey, Carlo (2022) Acoustic Rendering Based on Geometry Reduction and Acoustic Material Classification. In: IEEE Conference on Games (CoG) 2022, 21st - 24th August 2022, Beijing (Virtual).

Cooper, Frank (2021) Anglo-Saxon bling — a warrior king’s Golden Helmet. Gold Bulletin. ISSN 2190-7579

Cooper, Frank (2016) Do the New, Low-Cost Photopolymer 3D Printers Now Becoming Available Have a Place in the Jewelry Manufacturing Environment? In: Santa Fe Symposium, Albuquerque NM USA.

Cooper, Frank (2018) How Do You Replace The Irreplaceable? In: The Santa Fe Symposium, 20th - 23rd May 2018, Albuquerque New Mexico.

D

Danaher, S and Dudziak, T and Datta, P. K and Hasan, Reaz and Leung, P.S. (2013) Long-term oxidation of newly developed HIPIMS and PVD coatings with neural network prediction modelling. Corrosion Science, 69. pp. 322-337. ISSN 0010-938X

E

Egbelakin, T. and Omotayo, Temitope and Ogunmakinde, O. and Ekundayo, Damilola (2023) Eliciting social themes of flood mitigation and community engagement studies through text mining. International Journal of Building Pathology and Adaptation. ISSN 2398-4708

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) Investigation Of Natural Convection Characteristics With Brownian Motion Effect Using Different Nanofluids. Multiphase Sciences and Technology, 30 (2-3). pp. 135-152. ISSN 0276-1459

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2015) Investigation of Enhancement of Heat Transfer in Natural Convection Utilizing of Nanofluids. International Journal of Mechanical and Mechatronics Engineering, 9 (2). ISSN 2077-124X

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2017) Investigation of the Flow Characteristics of Titanium - Oxide - Water Nanofluid in Microchannel with Circular Cross Section. American Journal of Nano Research and Applications, 5 (6). pp. 102-109. ISSN 2575-3738

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) A New Effective Viscosity Model for Nanofluids. International Journal of Numerical Methods for Heat and Fluid Flow, 28 (3). pp. 571-583. ISSN 0961-5539

Etaig, Saleh and Hshem, Gamal and Hasan, Reaz and Perera, Noel (2019) Investigation of the Heat Performance for Hyper Nanofluid in a Co-Current Shell and Tube Heat Exchanger. International Journal of Engineering Research & Technology (IJERT), 8 (12). ISSN 2278-0181

F

Fancey, Kevin and Fazal, Adnan (2016) Prestressed polymeric matrix composites: Longevity aspects. Polymer Composites, 37 (7). pp. 2092-2097. ISSN 0272-8397

Fazal, Adnan and Fancey, Kevin (2014) UHMWPE fibre-based composites: Prestress-induced enhancement of impact properties. Composites Part B: Engineering, 66. pp. 1-6.

Fletcher, David and Cooper, Frank (2018) The Precious Project: Polishing and Finishing of Additive Manufacturing (AM) Jewelry. In: Thirty-Second Santa Fe Symposium, 20th - 23rd May 2018, Albuquerque New Mexico.

G

Gholampour, Aliakbar and Sofi, Massoud and Alipooramirabad, Houman and Tang, Youhong (2023) Performance of concrete containing pristine graphene-treated recycled concrete aggregates. Resources, Conservation and Recycling, 199. p. 107266. ISSN 0921-3449

I

Ioannidou, Vasiliki G. and Arthur, Scott (2020) Experimental results of the hydrological performance of a permeable pavement laboratory rig. Journal of Water Supply: Research and Technology-AQUA. ISSN 0003-7214

J

Jankovic, Ljubomir (2016) Reducing Simulation Performance Gap in Hemp-Lime Buildings Using Fourier Filtering †. Sustainability, 8 (9). p. 864. ISSN 2071-1050

K

Kianifar, Mohammad Ebrahim and Ahmadi, Ehsan (2023) Use of Waste Tire Rubber Alkali-Activated-Based Mortars in Repair of Concrete Structures. International Journal of Structural and Construction Engineering, 17 (1). pp. 68-74.

Krzyzanowski, Michal and Beynon, John H. (2009) Interface Effects for Deformation Processes. In: Fundamentals of Modeling for Metals Processing. ASM International, pp. 127-143. ISBN 978-1-61503-001-9

Krzyzanowski, Michal and Beynon, John H. and Farrugia, Didier C. J. (2010) Oxide Scale Behavior in High Temperature Metal Processing. Wiley‐VCH Verlag GmbH & Co. KGaA. ISBN 9783527325184

Krzyzanowski, Michal and Svyetlichnyy, Dmytro (2021) A Multiphysics Simulation Approach to Selective Laser Melting Modelling based on Cellular Automata and Lattice Boltzmann Methods. Computational Particle Mechanics. ISSN 2196-4386

Krzyzanowski, Michal and Svyetlichnyy, Dmytro and Bajda, Szymon (2021) Additive manufacturing of multi layered bioactive materials with improved mechanical properties: modelling aspects. Materials Science Forum, 1016. pp. 888-893. ISSN 1662-9752

P

Pathberiyage, Nadee Tharaka Dharmasiri and Delzendeh, Elham and Cheung, Franco and Mateo-Garcia, Monica (2023) A Conceptual Model for Assessing Circularity Potential of Building Materials at the Product Manufacturing Stage. In: XVI International Conference on Durability of Building Materials and Components, 2023, China.

S

Svyetlichnyy, Dmytro and Bajda, Szymon and Krzyzanowski, Michal (2023) An extended laser beam heating model for a numerical platform to simulate multi‑material selective laser melting. Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2018) Energy transfer including solid-liquid phase transformation aspects in modelling of additive layer manufacturing using Lattice Boltzmann-Cellular automata methods. In: ICCHMT 2018 International Conference on Computational Heat, Mass and Momentum Transfer, 21-24 May 2018, Cracow, Poland.

T

Tavousi, Ebrahim and Perera, Noel and Flynn, Dominic and Hasan, Reaz (2023) Heat transfer and fluid flow characteristics of the passive method in double tube heat exchangers: A critical review. International Journal of Thermofluids, 17. p. 100282. ISSN 2666-2027

Tavousi, Ebrahim and Perera, Noel and Flynn, Dominic and Hasan, Reaz (2023) Numerical investigation of laminar heat transfer and fluid flow characteristics of Al2O3 nanofluid in a double tube heat exchanger. International Journal of Numerical Methods for Heat and Fluid Flow. ISSN 0961-5539

This list was generated on Tue Dec 3 08:30:33 2024 UTC.

Research

In this section...