Items where Subject is "F200 Materials Science"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Jump to: B | C | D | E | F | J | K | N | S | T
Number of items at this level: 23.

B

Babu, Shiva and Berry, Stuart and Ward, Michael and Krzyzanowski, Michal (2018) Numerical investigation of key stamping process parameters influencing tool life and wear. Procedia Manufacturing, 15. pp. 427-435. ISSN 2351-9789

Bajda, S. and Liu, Yijun and Krzyzanowski, Michal and Dymek, Stanislaw (2019) Bioactive glass S520 laser cladding on ultrafine-grained pure titanium substrates. In: 30th Annual Conference of the European Society for Biomaterials ESB 2019, 9 - 13 September 2019, Dresden, Germany. (In Press)

Bajda, Szymon and Dymek, Stanislaw and Krzyzanowski, Michal and Retraint, Delphine and Majta, Janusz and Lisiecki, Lukasz and Kwiecien, Marcin (2018) Characterization of nanocrystallised multilayered metallic materials produced by the SMAT followed by constrained compression. Materials Characterization, 145. pp. 250-257. ISSN 1044-5803

Bajda, Szymon and Krzyzanowski, Michal (2019) Modelling aspects of laser cladding of bioactive glass coatings on ultrafine-grained titanium substrates. Computer Methods in materials Science. ISSN 1641-8581 (In Press)

Bajda, Szymon and Krzyzanowski, Michal and Cholewa-Kowalska, Katarzyna and Dziadek, Michal and Tokarski, Tomasz (2019) Analysis of the porosity degree during laser-assisted cladding of bioactive glass on titanium substrates with highly refined grain structure. In: ANNIC 2019 Applied Nanotechnology and Nanoscience International Conference, November 18 - 20, 2019, Paris, France. (In Press)

Bajda, Szymon and Svyetlichnyy, Dmytro and Retraint, Delphine and Krzyzanowski, Michal (2018) Numerical modelling of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by duplex technique. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2893-2905. ISSN 0268-3768

C

Cooper, Frank (2016) Do the New, Low-Cost Photopolymer 3D Printers Now Becoming Available Have a Place in the Jewelry Manufacturing Environment? In: Santa Fe Symposium, Albuquerque NM USA.

Cooper, Frank (2018) How Do You Replace The Irreplaceable? In: The Santa Fe Symposium, 20th - 23rd May 2018, Albuquerque New Mexico.

D

Danaher, S and Dudziak, T and Datta, P. K and Hasan, R and Leung, P.S. (2013) Long-term oxidation of newly developed HIPIMS and PVD coatings with neural network prediction modelling. Corrosion Science, 69. pp. 322-337. ISSN 0010-938X

E

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) INVESTIGATION OF NATURAL CONVECTION CHARACTERISTICS WITH BROWNIAN MOTION EFFECT USING DIFFERENT NANOFLUIDS. Multiphase Sciences and Technology, 30 (2-3). pp. 135-152. ISSN 0276-1459

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2015) Investigation of Enhancement of Heat Transfer in Natural Convection Utilizing of Nanofluids. International Journal of Mechanical and Mechatronics Engineering, 9 (2). ISSN 2077-124X

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2017) Investigation of the Flow Characteristics of Titanium - Oxide - Water Nanofluid in Microchannel with Circular Cross Section. American Journal of Nano Research and Applications, 5 (6). pp. 102-109. ISSN 2575-3738

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) A New Effective Viscosity Model for Nanofluids. International Journal of Numerical Methods for Heat and Fluid Flow, 28 (3). pp. 571-583. ISSN 0961-5539

F

Fancey, Kevin and Fazal, Adnan (2016) Prestressed polymeric matrix composites: Longevity aspects. Polymer Composites, 37 (7). pp. 2092-2097. ISSN 0272-8397

Fazal, Adnan and Fancey, Kevin (2014) UHMWPE fibre-based composites: Prestress-induced enhancement of impact properties. Composites Part B: Engineering, 66. pp. 1-6.

Fletcher, David and Cooper, Frank (2018) The Precious Project: Polishing and Finishing of Additive Manufacturing (AM) Jewelry. In: Thirty-Second Santa Fe Symposium, 20th - 23rd May 2018, Albuquerque New Mexico.

J

Jankovic, Ljubomir (2016) Reducing Simulation Performance Gap in Hemp-Lime Buildings Using Fourier Filtering †. Sustainability, 8 (9). p. 864. ISSN 2071-1050

K

Krzyzanowski, Michal and Beynon, John H. (2009) Interface Effects for Deformation Processes. In: Fundamentals of Modeling for Metals Processing. ASM International, pp. 127-143. ISBN 978-1-61503-001-9

Krzyzanowski, Michal and Beynon, John H. (2002) Oxide behaviour in hot rolling. In: Metal Forming Science and Practice. Elsevier Science, pp. 259-295. ISBN Hardcover ISNB: 9780080440248; eBook ISBN: 9780080536316

Krzyzanowski, Michal and Beynon, John H. and Farrugia, Didier C. J. (2010) Oxide Scale Behavior in High Temperature Metal Processing. Wiley‐VCH Verlag GmbH & Co. KGaA. ISBN 9783527325184

N

Neighbour, Gareth B and McGuire, M. (2011) Waste, limiting environmental impact and carbon materials: an opportunity? In: Knowledge Transfer Network (FP7 Marie Curie IAPP MONACO-EXTRA Project 218242), 22nd & 23rd September 2011, University of Brighton.

S

Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2018) Energy transfer including solid-liquid phase transformation aspects in modelling of additive layer manufacturing using Lattice Boltzmann-Cellular automata methods. In: ICCHMT 2018 International Conference on Computational Heat, Mass and Momentum Transfer, 21-24 May 2018, Cracow, Poland.

T

Thakur, Nikhil and Raju, Pathmeswaran and Krzyzanowski, Michal and Chinchapatnam, Phani (2018) Logical Knowledge-based Advanced Cost Estimation Methodology (LKACEM) Applied to Metal Matrix Composite Aero-Engine Blisk. International Journal of Computer Science and Technology, 9 (2). pp. 53-65. ISSN 0976-8491 (Online); 2229-4333 (Print)

This list was generated on Tue Nov 19 09:01:31 2019 UTC.

Research

In this section...