Items where Subject is "CAH10-01-02 - mechanical engineering"
- Subjects (8114)
- CAH10 - engineering and technology (687)
- CAH10-01 - engineering (645)
- CAH10-01-02 - mechanical engineering (106)
- CAH10-01 - engineering (645)
- CAH10 - engineering and technology (687)
A
Acmali, Suheda Semih and Ortakci, Yasin and Şeker, Hüseyin (2024) Green AI‐Driven Concept for the Development of Cost‐Effective and Energy‐Efficient Deep Learning Method: Application in the Detection of Eimeria Parasites as a Case Study. Advanced Intelligent Systems. ISSN 2640-4567
Adamaki, V. and Minster, T. and Thomas, T. and Fourlaris, Georgios and Bowen, C.R. (2016) Study of the mechanical properties of Ti₂AlC after thermal shock. Materials Science and Engineering: A, 667. pp. 9-15. ISSN 0921-5093
Al-Neama, Ahmed F. and Khatir, Zinedine and Kapur, Nikkil and Summers, Johnathan and Thompson, Harvey M. (2018) An experimental and numerical investigation of chevron fin structures in serpentine minichannel heat sinks. International Journal of Heat and Mass Transfer, 120 (May 18). pp. 1213-1228. ISSN 0017-9310
Alipooramirabad, Houman and Kianfar, Sina and Paradowska, Anna and Ghomashchi, Reza (2024) Residual stress measurement in engine block—an overview. International Journal of Advanced Manufacturing Technology, 131. ISSN 0268-3768
Annaz, Fawaz (2020) Force Equalisation in Torque-Summed Electromechanical Actuators. Measurement, 156 (2020). p. 107600. ISSN 0263-2241
Arumugam, Thibankumar and Vijaya Kumar, Suria Devi and Karuppanan, Saravanan and Ovinis, Mark (2023) The Influence of Axial Compressive Stress and Internal Pressure on a Pipeline Network: A Review. Applied Sciences, 13 (6). ISSN 2076-3417
B
Babu, Shiva and Berry, Stuart and Ward, Michael and Krzyzanowski, Michal (2018) Numerical investigation of key stamping process parameters influencing tool life and wear. Procedia Manufacturing, 15. pp. 427-435. ISSN 2351-9789
Bajda, Szymon and Dymek, Stanislaw and Krzyzanowski, Michal and Retraint, Delphine and Majta, Janusz and Lisiecki, Lukasz and Kwiecien, Marcin (2018) Characterization of nanocrystallised multilayered metallic materials produced by the SMAT followed by constrained compression. Materials Characterization, 145. pp. 250-257. ISSN 1044-5803
Bajda, Szymon and Krzyzanowski, Michal (2019) Modelling aspects of laser cladding of bioactive glass coatings on ultrafine-grained titanium substrates. Computer Methods in Materials Science, 19 (3). pp. 138-149. ISSN 1641-8581
Bajda, Szymon and Svyetlichnyy, Dmytro and Retraint, Delphine and Krzyzanowski, Michal (2018) Numerical modelling of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by duplex technique. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2893-2905. ISSN 0268-3768
Baniamerian, Zahra and Jafari, Amir Sadra and Perera, Noel (2022) Effects of pressurization on the Enthalpy of vaporization for the SiO2 nanofluid. Physical Chemistry Chemical Physics, 25. pp. 673-683. ISSN 1463-9076
Bkar, Osman Abu and Ovinis, Mark and Mohmmed, Abdalellah O. (2022) A Comparative Analysis of In-Situ Optical Velocimetries for Oil Spill Flow Rate Estimation. Fluids, 7 (4). p. 126. ISSN 2311-5521
Boateng, Prince and Omotayo, Temitope and Osunsanmi, Temidayo and Ekundayo, Damilola (2022) Socio-ecological risks management dynamic simulation in megaproject development of the Edinburgh Tram Network. International Journal of Building Pathology and Adaptation. ISSN 2398-4708
Butt, Javaid and Khan, Md Ashikul Alam and Adnan, Muhammad and Mohaghegh, Vahaj (2024) Performance Analysis of FFF-Printed Carbon Fiber Composites Subjected to Different Annealing Methods. Journal of Manufacturing and Materials Processing, 8 (6). p. 252. ISSN 2504-4494
C
Cherry, Molly and Khatir, Zinedine and Khan, Amirul and Bissell, Malenka (2022) The impact of 4D-Flow MRI spatial resolution on patient-specific CFD simulations of the thoracic aorta. Scientific Reports, 12 (15128). ISSN 2045-2322
Cornish, Richard (2018) Evidence based lightweight car body responses. In: International Forum Automotive Acoustics and Vibration, 25 to 26 September 2018, National Conference Centre Birmingham.
Cornish, Richard (2022) Heat transfer model based on the ideas and equations of statistical energy analysis applied to radiation heat flow in electric furnace for melting scrap aluminium and billet. In: 17th UK Heat Transfer Conference (UKHTC2021), 4th - 6th April 2022, Manchester, UK.
Cuce, Pinar Mert and Alvur, Emre and Cuce, Erdem and Alshahrani, Saad and Prakash, Chander and Tan, Huseyin and Ustabas, Ilker (2024) Unlocking energy efficiency: Experimental investigation of bamboo fibre reinforced briquettes as sustainable solution with enhanced thermal resistance. Case Studies in Thermal Engineering, 60. p. 104680. ISSN 2214157X
Cuce, Pinar Mert and Cuce, Erdem and Mandal, Dipak Kumar and Gayen, Dilip Kumar and Asif, Muhammad and Bouabidi, Abdallah and Alshahrani, Saad and Prakash, Chander and Soudagar, Manzoore Elahi M. (2024) ANN and CFD driven research on main performance characteristics of solar chimney power plants: Impact of chimney and collector angle. Case Studies in Thermal Engineering, 60. p. 104568. ISSN 2214-157X
D
Duca, Dumitru and Rahman, Mostafiz and Carpentier, Yvain and Pirim, Claire and Boies, Adam and Focsa, Cristian (2021) Chemical characterization of size-selected nanoparticles emitted by a gasoline direct injection engine: Impact of a catalytic stripper. Fuel, 294. p. 120317. ISSN 0016-2361
E
Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) Investigation Of Natural Convection Characteristics With Brownian Motion Effect Using Different Nanofluids. Multiphase Sciences and Technology, 30 (2-3). pp. 135-152. ISSN 0276-1459
Etaig, Saleh and Hasan, Reaz and Perera, Noel (2015) Investigation of Enhancement of Heat Transfer in Natural Convection Utilizing of Nanofluids. International Journal of Mechanical and Mechatronics Engineering, 9 (2). ISSN 2077-124X
Etaig, Saleh and Hasan, Reaz and Perera, Noel (2017) Investigation of the Flow Characteristics of Titanium - Oxide - Water Nanofluid in Microchannel with Circular Cross Section. American Journal of Nano Research and Applications, 5 (6). pp. 102-109. ISSN 2575-3738
Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) A New Effective Viscosity Model for Nanofluids. International Journal of Numerical Methods for Heat and Fluid Flow, 28 (3). pp. 571-583. ISSN 0961-5539
Etaig, Saleh and Hshem, Gamal and Hasan, Reaz and Perera, Noel (2019) Investigation of the Heat Performance for Hyper Nanofluid in a Co-Current Shell and Tube Heat Exchanger. International Journal of Engineering Research & Technology (IJERT), 8 (12). ISSN 2278-0181
F
Fan, Y L and Perera, Noel and Tan, Kian (2019) An integrated experimental and numerical method to assess the fatigue performance of recycled rail. Journal of Mechanical Engineeering and Sciences, 13 (4). pp. 5988-6006. ISSN 2289-4659
Filimonov, Maxim and Oraifige, Ilias and Vijay, Venkatesh Chennam (2020) A novel graph-based modelling approach for reducing complexity in model-based systems engineering environment. International Journal of System of Systems Engineering, 10 (2). ISSN 1748-0671
G
Ghodsi, Mojtaba and Mohammadzaheri, Morteza and Soltani, Payam (2023) Analysis of Cantilever Triple-Layer Piezoelectric Harvester (CTLPH): Non-Resonance Applications. Energies, 16 (7). p. 3129. ISSN 1996-1073
Ghodsi, Mojtaba and Morteza, Mohammadzaheri and Payam, Soltani and Hamidreza, Ziaiefar (2022) A New Active Anti-Vibration System Using a Magnetostrictive Bimetal Actuator. Journal of Magnetism and Magnetic Materials, 557. ISSN 0304-8853
H
Hamad, Hazim S. and Kapur, Nik and Khatir, Zinedine and Querin, O.M. and Thompson, Harvey M. and Wang, Yongxing and Wilson, Mark (2020) Computational fluid dynamics analysis and optimisation of polymerase chain reaction thermal flow systems. Applied Thermal Engineering, 183 (116122). ISSN 1359-4311
Hao, M. and Osman, K.A. and Boomer, D.R. and Newton, C.J. (1996) Developments in characterization of resistance spot welding of aluminum. Welding Journal (Miami, Fla), 75 (1). 1-s.
I
Idrissi, Moad and Salami, Mohammad R and Annaz, Fawaz (2022) A Review of Quadrotor Unmanned Aerial Vehicles: Applications, Architectural Design and Control Algorithms. Journal of Intelligent & Robotic Systems, 104. p. 22. ISSN 0921-0296
Ige, Ebenezer Olubunmi and Odesola, Isaac Folorunso and Babatunde, Sikiru and Ilori, Olusegun M. (2022) Magneto-Rotational Augmentation of Bioconvective Transport in Plasma-Nanofluid Flowing through a Penetrable Spinning Disc. Journal of Engineering, 2022. ISSN 2314-4904
Iqbal, Mohsin and Karuppanan, Saravanan and Perumal, Veeradasan and Ovinis, Mark and Iqbal, Muhammad and Rasul, Adnan (2024) Optimization of fibre orientation for composite reinforcement of circular hollow section KT-joints. International Journal of Structural Integrity. ISSN 1757-9864
Iqbal, Mohsin and Karuppanan, Saravanan and Perumal, Veeradasan and Ovinis, Mark and Nouman, Hina (2023) Empirical modeling of stress concentration factors using finite element analysis and artificial neural networks for the fatigue design of tubular KT‐joints under combined loading. Fatigue & Fracture of Engineering Materials & Structures, 46 (11). pp. 4333-4349. ISSN 8756-758X
Iqbal, Mohsin and Karuppanan, Saravanan and Perumal, Veeradasan and Ovinis, Mark and Rasul, Adnan (2023) Rehabilitation Techniques for Offshore Tubular Joints. Journal of Marine Science and Engineering, 11 (2). ISSN 2077-1312
Iyi, D. and Hasan, Reaz and Penlington, Roger (2018) Experimental and numerical study of Buoyancy-driven low turbulence flow in rectangular enclosure partially filled with isolated solid blockages. International Journal of Heat and Mass Transfer, 127 (B). pp. 534-545. ISSN 0017-9310
Iyi, Draco and Hasan, Reaz and Underwood, Chris and Penlington, Roger (2014) Double skin façade: Modelling technique and influence of venetian blinds on the airflow and heat transfer. Applied Thermal Engineering, 71 (1). pp. 219-229. ISSN 1359-4311
K
Khatir, Zinedine and Hanson, Bruce and Fairweather, Michael and Peter J., Heggs (2017) CFD Analysis of Liquid-Liquid Extraction Pulsed Sieve-Plate Extraction Columns. In: 27th European Symposium on Computer Aided Process Engineering, 1st-5th October 2017, Barcelona, Spain.
Khatir, Zinedine and Kubiak, K.J. and Jimack, P.K. and Mathia, T.G. (2016) Dropwise condensation heat transfer process optimisation on superhydrophobic surfaces using a multi-disciplinary approach. Applied Thermal Engineering, 106 (5/8/16). pp. 1337-1344. ISSN 1359-4311
Khatir, Zinedine and Taherkhani, Ali Reza and Paton, Joe and Thompson, Harvey and Kapur, Nik and Toropov, Vassili (2015) Energy thermal management in commercial bread-baking using a multi-objective optimisation framework. Applied Thermal Engineering, 80 (5/4/15). pp. 141-149. ISSN 1359-4311
Khosravani, Mohammad Reza and Soltani, Payam and Reinicke, Tamara (2023) Effects of steps on the load bearing capacity of 3D-printed single lap joints. Journal of Materials Research and Technology, 23. pp. 1834-1847. ISSN 2214-0697
Krzyzanowski, Michal and Alaswad, Abed and Rentzelas, Panagiotis and Mavritsaki, Eirini and Leyland, Laura and Sodre, Jose Ricardo and Annaz, Fawaz and Pendry, Alan and Shaw, Clayton and Cornish, Richard (2017) BCU Magnesium Symposium 2017 Abstract Booklet. In: The BCU Magnesium Symposium, Thursday 20 July 2017, Birmingham City University. (Unpublished)
Krzyzanowski, Michal and Beynon, John H. (2009) Interface Effects for Deformation Processes. In: Fundamentals of Modeling for Metals Processing. ASM International, pp. 127-143. ISBN 978-1-61503-001-9
Krzyzanowski, Michal and Beynon, John H. and Farrugia, Didier C. J. (2010) Oxide Scale Behavior in High Temperature Metal Processing. Wiley‐VCH Verlag GmbH & Co. KGaA. ISBN 9783527325184
Krzyzanowski, Michal and Svyetlichnyy, Dmytro (2021) A Multiphysics Simulation Approach to Selective Laser Melting Modelling based on Cellular Automata and Lattice Boltzmann Methods. Computational Particle Mechanics. ISSN 2196-4386
Krzyzanowski, Michal and Svyetlichnyy, Dmytro and Bajda, Szymon (2021) Additive manufacturing of multi layered bioactive materials with improved mechanical properties: modelling aspects. Materials Science Forum, 1016. pp. 888-893. ISSN 1662-9752
Kulkarni, S.S. and Edwards, D.J. and Pärn, E.A. and Chapman, C. and Aigbavboa, C. and Cornish, R. (2018) Evaluation of vehicle lightweighting to reduce greenhouse gas emissions with focus on magnesium substitution. Journal of Engineering, Design and Technology, 16 (6). pp. 869-888. ISSN 1726-0531
Kulkarni, Siddharth Suhas (2016) Design study of a horizontal axis tidal turbine blade. Doctoral thesis, Birmingham City University.
Kumar, Suria Devi Vijaya and Karuppanan, Saravanan and Ovinis, Mark (2021) Failure pressure prediction of high toughness pipeline with a single corrosion defect subjected to combined loadings using artificial neural network (ANN). Metals, 11 (2). p. 373. ISSN 2075-4701
Kumar, Suria Devi Vijaya and Karuppanan, Saravanan and Ovinis, Mark (2021) An empirical equation for failure pressure prediction of high toughness pipeline with interacting corrosion defects subjected to combined loadings based on artificial neural network. Mathematics, 9 (20). p. 2582. ISSN 2227-7390
L
Lahr, Jens (2016) Experimental and computational analysis of oil flow in cooling galleries of diesel engine pistons. Doctoral thesis, Birmingham City University.
Lo, Michael and Karuppanan, Saravanan and Ovinis, Mark (2022) ANN- and FEA-Based Assessment Equation for a Corroded Pipeline with a Single Corrosion Defect. Journal of Marine Science and Engineering, 10 (4). p. 476. ISSN 2077-1312
Lo, Michael and Karuppanan, Saravanan and Ovinis, Mark (2021) Failure pressure prediction of a corroded pipeline with longitudinally interacting corrosion defects subjected to combined loadings using FEM and ANN. Journal of Marine Science and Engineering, 9 (3). p. 281. ISSN 2077-1312
M
Mohammadzaheri, Morteza and AlSulti, Sami and Ghodsi, Mojtaba and Soltani, Payam (2023) Charge Estimation of Piezoelectric Actuators: A Comparative Study. Eenrgies, 16 (10). ISSN 1996-1073
Mohammadzaheri, Morteza and AlSulti, Sami and Ghodsi, Mojtaba and Soltani, Payam (2023) Comparison of Charge Estimators for Piezoelectric Actuators. In: 28th International Conference on Automation and Computing, 30th August -1st September 2023, Birmingham, UK.
Mohammadzaheri, Morteza and Ghodsi, Mojtaba (2023) An Enhanced Smith-Predictor-based Control System for delayed MIMO Processes and its Use on a CSTR with Multiple Time-delays. In: 28th International Conference on Automation and Computing, 30th August -1st September 2023, Birmingham, UK.
Mohammadzaheri, Morteza and Khaleghifar, Arman and Ghodsi, Mojtaba and Soltani, Payam and AlSulti, Sami (2022) A Discrete Approach to Feedback Linearization, Yaw Control of an Unmanned Helicopter. Unmanned Systems. ISSN 2301-3850
Mohammadzaheri, Morteza and Soltani, Payam and Ghodsi, Mojtaba (2022) Micro/Nanopositioning Systems with Piezoelectric Actuators and Their Role on Sustainability and Ecosystem. In: EcoMechatronics: Challenges for Evolution, Development and Sustainability. Springer. ISBN 9783031075544
Mohammadzaheri, Morteza and Tafreshi, Reza and Bazghaleh, Mohsen and Grainger, Steven and Khorasani, Mohammad (2024) Induced voltage in piezoelectric tube driven segments and their use in nanopositioning, an assessment. IET Science, Measurement & Technology. ISSN 1751-8830
Mohammadzaheri, Morteza and Ziaiefar, Hamidreza and Ghodsi, Mojtaba (2022) Digital Charge Estimation for Piezoelectric Actuators, an Artificial Intelligence Approach. In: Handbook of Research on New Investigations in Artificial Life, AI, and Machine Learning. IGI Global, pp. 117-140. ISBN 9781799886860
Mohammadzaheri, Morteza and Ziaiefar, Hamidreza and Ghodsi, Mojtaba and Emadi, Mohammadreza and Zarog, Musaab and Soltani, Payam and Bahadur, Issam (2022) Adaptive Charge Estimation of Piezoelectric Actuators with a Variable Sensing Resistor, an Artificial Intelligence Approach. Engineering Letters, 30 (1). ISSN 1816-0948
Mohammadzaheri, Morteza and Ziaiefar, Hanmidreza and Ghodsi, Mojtaba and Bahadur, Issam and Zarog, Musaab and Emadi, Mohammadreza and Amouzadeh, Amirhosein (2023) Modelling of Engineering Systems with Small Data, a Comparative Study. In: Perspectives and Considerations on the Evolution of Smart Systems. IGI Global. ISBN 9781668476840
N
Naylor, Andrew and Hackney, Philip and Perera, Noel and Clahr, Emil (2012) A predictive model for the cutting force in wood machining developed using mechanical properties. Bioresources, 7 (3). pp. 2883-2894. ISSN 1930-2126
O
Obiora, Valetine and Jamal, Wissam and Saha, Chitta and Goswami, Rajib and Ezzine, Mouadh and Ogu, Reginald (2024) Multicarrier PWM Control In Modular Multilevel Converter. In: 2024 IEEE International conference on electro-computing for sustainable development, 2024, 26th-28th November 2024, Ekiti, Nigeria. (In Press)
Olatunbosun, Samuel and Odediran, Sunday and Ekundayo, Damilola and Aigbavboa, Clinton (2023) Factors inhibiting energy access in the delivery of construction projects in Lagos Metropolis, Nigeria. International Journal of Construction Management. ISSN 1562-3599
P
Panjavarnam, Kesavan and Ovinis, Mark and Karuppanan, Saravanan (2021) A New Roll and Pitch Control Mechanism for an Underwater Glider. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (1). ISSN 2289 - 7879
Paul, Roshni and Melville, Lynsey and Bature, Aminu and Sulu, Michael and Suhartini, Sri (2024) Techno-economic feasibility study of macroalgae for anaerobic digestion. Bioresource Technology Reports, 28. p. 101984. ISSN 2589-014X
Payam, Soltani and Morteza, Mohammadzaheri and Mojtaba, Ghodsi (2023) Piezoelectric-Magnetostrictive Vibration Absorbers : Modelling and Optimisation. In: The 28th International Conference on Autimation and Computing, 30th August - 1st September 2023, Birmingham, UK.
Perera, Noel (2019) Sustainable energy, engineering, materials and environment: current advances and challenges. Environmental Science and Pollution Research. ISSN 0944-1344
R
Rasul, Adnan and Karuppanan, Saravanan and Perumal, Veeradasan and Ovinis, Mark and Iqbal, Mohsin (2024) An artificial neural network model for determining stress concentration factors for fatigue design of tubular T-joint under compressive loads. International Journal of Structural Integrity. ISSN 1757-9864
Rasul, Adnan and Karuppanan, Saravanan and Perumal, Veeradasan and Ovinis, Mark and Iqbal, Mohsin and Alam, Khurshid (2024) Empirical modeling of stress concentration factors using artificial neural networks for fatigue design of tubular T-joint under in-plane and out-of-Plane bending moments. International Journal of Structural Integrity. ISSN 1757-9864
Rasul, Adnan and Karuppanan, Saravanan and Perumal, Veeradasan and Ovinis, Mark and Iqbal, Mohsin (2024) Ultimate Strength of Internal Ring-Reinforced KT Joints Under Brace Axial Compression. Civil Engineering Journal, 10 (5). pp. 1543-1560. ISSN 2676-6957
Remesh, Sathaniswarman and Loganathan, Narasimhaa Naidu and Perumal, Veeradasan and Ovinis, Mark and Karuppanan, Saravanan and Edison, Thomas Nesakumar Jebakumar Immanuel and Raja, Pandian Bothi and Ibrahim, Mohamad Nasir Mohamad and Arumugam, Natarajan and Kumar, Raju Suresh (2023) A high performance selectively grown nano-octahedral Mn3O4 on lignin derived laser scribed graphene for microsupercapacitor applications. Journal of Energy Storage, 77. p. 109920. ISSN 2352-152X
Remesh, Sathaniswarman and Vasudevan, Mugashini and Perumal, Veeradasan and Edison, Thomas Nesakumar Jebakumar Immanuel and Raja, Pandian Bothi and Ibrahim, Mohamad Nasir Mohamad and Karuppanan, Saravanan and Ovinis, Mark and Arumugam, Natarajan and Kumar, Raju Suresh (2024) Study on current collector and electrolyte design/electrochemical behaviour of an in-plane lignin derived laser scribed graphene for microsupercapacitor application. Ain Shams Engineering Journal. p. 102889. ISSN 2090-4479
Remesh, Sathaniswarman and Vasudevan, Mugashini and Perumal, Veeradasan and Ovinis, Mark and Karuppanan, Saravanan and Edison, Thomas Nesakumar Jebakumar Immanuel and Raja, Pandian Bothi and Ibrahim, Mohamad Nasir Mohamad and Voon, Chun Hong and Arumugam, Natarajan and Kumar, Raju Suresh (2023) Oil palm lignin-derived laser scribed graphene in neutral electrolyte for high-performance microsupercapacitor application. Journal of Environmental Chemical Engineering, 11 (5). p. 110600. ISSN 2213-3437
Remesh, Sathaniswarman and Vasudevan, Mugashini and Sivakumar, Mineesha and Perumal, Veeradasan and Ovinis, Mark and Karuppanan, Saravanan and Edison, Thomas Nesakumar Jebakumar Immanuel and Raja, Pandian Bothi and Ibrahim, Mohamad Nasir Mohamad and Latip, Ahmad Faiz Bin Abdul and Arumugam, Natarajan and Kumar, Raju Suresh (2023) In-situ Mg-Al LDH infused lignin-derived laser scribed graphene for facilitated ion transport in flexible supercapacitor application. Journal of the Taiwan Institute of Chemical Engineers, 153. p. 105247. ISSN 1876-1070
S
Sadeq, Safwan and Ovinis, Mark and Karuppanan, Saravanan (2022) Modeling and Simulation of PMSG Wind Energy Conversion System using Active Disturbance Rejection Control. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (1). ISSN 2289 - 7879
Samuels, P. (2016) Developing Extended Real and Virtual Robotics Enhancement Classes with Years 10-13. In: Mathematics and Education – Learning, Technology and Assessment: Festschrift in honour of Lenni Haapasalo. WTM-Verlag, Munster, pp. 101-115. ISBN 9783959870054
Samuels, P. and Poppa, S. (2016) Developing extended real and virtual robotics enhancement classes with years 10-13. In: Robotics in Education: Research and practices for robotics in STEM education. Advances in Intelligent Systems and Computing (457). Springer Verlag, Berlin, pp. 69-81. ISBN 978-3-319-42975-5
Shah, Raja Mazuir Raja Ahsan and McGordon, Andrew and Rahman, Mostafiz and Amor-Segan, Mark and Jennings, Paul (2020) Characterisation of micro turbine generator as a range extender using an automotive drive cycle for series hybrid electric vehicle application. Applied Thermal Engineering, 184. p. 116302. ISSN 1359-4311
Stimson, Joshua (2019) Thermomechanical Analysis and Development of a Novel Monochromator First Crystal Using an Interference Fit: A complete redesign of first crystal assemblies from first principles. Doctoral thesis, Birmingham City University.
Subramani, Indra Gandi and Remesh, Sathaniswarman and Perumal, Veeradasan and Gopinath, Subash C.B. and Karuppanan, Saravanan and Raja, Pandian Bothi and Ovinis, Mark and Arumugam, Natarajan and Kumar, Raju Suresh (2024) Flexible laser-induced graphene electrodes on polyimide film: Hybrid nanoflower-modified dielectric microjunctions for non-faradaic analysis. Biochemical Engineering Journal, 208. p. 109339. ISSN 1369-703X
Svyetlichnyy, Dmytro and Bajda, Szymon and Krzyzanowski, Michal (2023) An extended laser beam heating model for a numerical platform to simulate multi‑material selective laser melting. Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2020) Development of Holistic Homogeneous Model of Selective Laser Melting based on Lattice Boltzmann Method: Qualitative Simulation. In: ICNAAM 2019 -17th International Conference of Numerical Analysis and Applied Mathematics, 23 - 28 September 2019, Rhodes, Greece.
Svyetlichnyy, Dmytro and Krzyzanowski, Michal (2018) Energy transfer including solid-liquid phase transformation aspects in modelling of additive layer manufacturing using Lattice Boltzmann-Cellular automata methods. In: ICCHMT 2018 International Conference on Computational Heat, Mass and Momentum Transfer, 21-24 May 2018, Cracow, Poland.
Svyetlichnyy, Dmytro and Krzyzanowski, Michal and Lach, Lukasz and Straka, Robert. (2021) Development of homogeneous numerical platform for 3D through process simulation of selective laser melting considering changes of aggregative states. In: 13th International Conference on Computational Heat Mass and Momentum Transfer, May 18-21, 2021, Paris, France. (Unpublished)
Sykes, Thomas C. and Castrejón-Pita, Alfonso A. and Castrejón-Pita, J. Rafael and Harbottle, David and Khatir, Zinedine and Thompson, Harvey M. and Wilson, Mark (2020) Surface jets and internal mixing during the coalescence of impacting and sessile droplets. Phys. Rev. Fluids, 5 (023602). ISSN 2469-990X
T
Tavousi, Ebrahim and Perera, Noel and Flynn, Dominic and Hasan, Reaz (2023) Heat transfer and fluid flow characteristics of the passive method in double tube heat exchangers: A critical review. International Journal of Thermofluids, 17. p. 100282. ISSN 2666-2027
Tavousi, Ebrahim and Perera, Noel and Flynn, Dominic and Hasan, Reaz (2023) Numerical Investigation of Heat Transfer and Fluid Flow Characteristics of Al2O3 Nanofluid In A Double Tube Heat Exchanger With Turbulator Insertion. In: 9th World Congress on Mechanical, Chemical, and Material Engineering (MCM'23) Brunel University, London, United Kingdom –August 06-08, 2023, 6th - 8th August 2023, London, England.
Tavousi, Ebrahim and Perera, Noel and Flynn, Dominic and Hasan, Reaz (2023) Numerical investigation of laminar heat transfer and fluid flow characteristics of Al2O3 nanofluid in a double tube heat exchanger. International Journal of Numerical Methods for Heat and Fluid Flow. ISSN 0961-5539
Taylor, T. and Danks, S. and Fourlaris, Georgios (2016) Dynamic Tensile Testing of Ultrahigh Strength Hot Stamped Martensitic Steels. Steel Research International, 88 (3). ISSN 1611-3683
Taylor, T. and Fourlaris, Georgios and Cafolla, J. (2016) Finite Element Modelling Full Vehicle Side Impact with Ultrahigh Strength Hot Stamped Steels. Journal of Materials Engineering and Performance, 25 (10). pp. 4495-4505. ISSN 1059-9495
Taylor, T. and Fourlaris, Georgios and Evans, P. (2016) Development of carbon–manganese–chromium steels for automotive hot stamping technologies. Materials Science and Technology, 33 (4). pp. 487-496. ISSN 0267-0836
V
Vasudevan, Mugashini and Kanesan, Aiswarya and Remesh, Sathaniswarman and Perumal, Veeradasan and Raja, Pandian Bothi and Mohamad Ibrahim, Mohamad Nasir and Karuppanan, Saravanan and Gopinath, Subash C. B. and Ovinis, Mark (2023) Characterizations of synthesized laser scribed graphene/molybdenum disulfide (LSG/MoS2) hybrids for supercapacitor performance. Journal of Water and Environmental Nanotechnology, 8 (2). pp. 137-150. ISSN 2476-7204
Vasudevan, Mugashini and Perumal, Veeradasan and Karuppanan, Saravanan and Ovinis, Mark and Raja, Pandian Bothi and Gopinath, Subash C. B. and Edison, Thomas Nesakumar Jebakumar Immanuel (2022) A Comprehensive Review on Biopolymer Mediated Nanomaterial Composites and Their Applications in Electrochemical Sensors. Critical Reviews in Analytical Chemistry. ISSN 1040-8347
Vijaya Kumar, Suria Devi and Karuppanan, Saravanan and Ovinis, Mark (2022) An Artificial Neural Network-Based Equation for Predicting the Remaining Strength of Mid-to-High Strength Pipelines with a Single Corrosion Defect. Applied Sciences, 12 (3). p. 1722. ISSN 2076-3417
Vijaya Kumar, Suria Devi and Karuppanan, Saravanan and Ovinis, Mark (2022) Artificial Neural Network-Based Failure Pressure Prediction of API 5L X80 Pipeline with Circumferentially Aligned Interacting Corrosion Defects Subjected to Combined Loadings. Materials. ISSN 1996-1944
Vijaya Kumar, Suria Devi and Karuppanan, Saravanan and Perumal, Veeradasan and Ovinis, Mark (2023) Failure Pressure Prediction of Corroded High-Strength Steel Pipe Elbow Subjected to Combined Loadings Using Artificial Neural Network. Mathematics, 11 (7). ISSN 2227-7390
Vijaya Kumar, Suria Devi and Lo, Michael and Karuppanan, Saravanan and Ovinis, Mark (2022) Empirical Failure Pressure Prediction Equations for Pipelines with Longitudinal Interacting Corrosion Defects Based on Artificial Neural Network. Journal of Marine Science and Engineering, 10 (6). p. 764. ISSN 2077-1312
Vijaya Kumar, Suria Devi and Lo, Michael and Karuppanan, Saravanan and Ovinis, Mark (2022) Failure Pressure Prediction of Medium to High Toughness Pipe with Circumferential Interacting Corrosion Defects Subjected to Combined Loadings Using Artificial Neural Network. Applied Sciences, 12 (9). p. 4120. ISSN 2076-3417
W
Whipps, Stuart (2020) The Kipper and The Corpse. [Show/Exhibition]
Williams, Andrew Robert (2019) Quantification of plausibility cross-checks in safety related control system architecture design for automotive applications. Doctoral thesis, Birmingham City University.
Woo, Mino and Giannopoulos, George and Rahman, Mostafiz and Swanson, Jacob and Stettler, Marc E. J. and Boies, Adam M. (2021) Multiscale numerical modeling of solid particle penetration and hydrocarbons removal in a catalytic stripper. Aerosol Science and Technology, 55 (9). pp. 987-1000. ISSN 0278-6826
Z
Zare, Parvenah and Perera, Noel and Lahr, Jens and Hasan, Reaz (2023) A novel thermal management system for cylindrical lithium-ion batteries using internal-external fin-enhanced phase change material. Applied Thermal Engineering, 238. p. 121985. ISSN 1359-4311