Items where Subject is "H100 General Engineering"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | X | Y | Z
Number of items at this level: 220.

A

Abdallah, Fatima (2019) Agent-based models for residential energy consumption and intervention simulation. Doctoral thesis, Birmingham City University.

Afsar Dizaj, Ebrahim and Salami, Mohammad R. and Kashani, Mohammad M. (2021) Seismic vulnerability assessment of ageing reinforced concrete structures under real mainshock-aftershock ground motions. Structure and Infrastructure Engineering. ISSN 1744-8980

Al Makky, Ahmed and Alaswad, A. and Gibson, D. and Song, S. and Olabi, A.G. (2018) A numerical and experimental study of a new design of closed dynamic respiration chamber. Computers and Electronics in Agriculture, 145. pp. 326-340.

Al-Damook, Moustafa and Al Qubeissi, Mansour and Khatir, Zinedine and Dixon-Hardy, Darron and Heggs, Peter J. (2021) Thermal and Electrical Performance Evaluation and Design Optimization of Hybrid PV/T Systems. In: 16th UK Heat Transfer Conference (UKHTC2019), 8th - 10th September 2019, University of Nottingham.

Al-Neama, Ahmed F. and Khatir, Zinedine and Kapur, Nikkil and Summers, Johnathan and Thompson, Harvey M. (2018) An experimental and numerical investigation of chevron fin structures in serpentine minichannel heat sinks. International Journal of Heat and Mass Transfer, 120 (May 18). pp. 1213-1228. ISSN 0017-9310

Alaaallah, Elsabaa and Ward, Michael and Wu, Wenyan (2019) Hybrid Localization techniques in LoRa-based WSN. In: the 25th International Conference on Automation & Computing, Lancaster University, Lancaster UK, 5-7 September 2019, 5-7 September 2019, Lancaster, UK.

Alhomoud, S.S. and Harmanto, D. and Oraifige, Ilias (2014) An investigation into the effect of Drag coefficient on overtaking of car. Applied Mechanics and Materials, 493. pp. 151-154.

Ali, M. Tanseer and Wu, Ruiheng and Mao, Luhong and Callaghan, Peter and Rapajic, Pedrag (2014) High frequency CMOS amplifier with improved linearity. IET Circuits, Devices and Systems, 8 (6). pp. 450-458. ISSN 1751-858X

Annaz, Fawaz (2014) Design and Development of Multi-Lane Smart Electromechanical Actuators. Institution of Engineering and Technology. ISBN 9781849196550

Annaz, Fawaz and Miyuranga Kaluarachchi, Malaka (2014) Development of a Soft Teaching Pendant for a Six-Axis Manipulator. International Journal of Electronics, Computer and Communications Technologies, IJECCT, 4 (2). pp. 5-12. ISSN 2180-3536

Annaz, Fawaz and Wazir, H.K (2015) Hardware-virtual environment integration. In: 5th Brunei International Conference on Engineering and Technology (BICET 2014), 1st-3rd November 2014, Brunei.

Annaz, Fawaz and Wazir, H.K (2015) Using unity for 3D object orientation in a virtual environment. In: 5th Brunei International Conference on Engineering and Technology (BICET 2014), 1st-3rd November 2014, Brunei.

Arewa, Andrew Oyen and Ahmed, Abdullahi and Edwards, David J. and Nwankwo, Chizaram (2021) Fire Safety in High-Rise Buildings: Is the Stay-Put Tactic a Misjudgement or Magnificent Strategy? Buildings, 11 (8). e339. ISSN 2075-5309

Ashu, M. and Shafik, M. and Oraifige, Ilias (2016) A Multi Degree of Freedom Actuation System for Robot and Machine Vision Industrial Applications. In: 14th International Conference on Manufacturing Research (ICMR 2016, September 6th-8th, 2016, Loughborough University, Loughborough, UK.

B

Bajda, Szymon and Krzyzanowski, Michal and Kwiecien, Marcin and Majta, Janusz and Lisiecki, Lukasz and Sroka, Jakub (2016) Towards Processing of Multilayered Metallic Materials - Constrained Compression Testing. Computer Methods in materials Science, 16 (2). pp. 76-86. ISSN 1641-8581

Bajda, Szymon and Krzyzanowski, Michal and Muszka, K. and Rainforth, W. Mark (2015) Numerical analysis of highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by using duplex technique. Surface & Coatings Technology, 277. pp. 170-180. ISSN 0257-8972

Bajda, Szymon and Kwiecien, Marcin and Sroka, Jakub and Krzyzanowski, Michal (2016) Nanocrystallised multilayered metalic materials for structural applications: properties and processing. Hutnik-WH, 83 (2). pp. 72-77. ISSN 1230-3534

Bajda, Szymon and Ratuszek, Wiktoria and Krzyzanowski, Michal and Retraint, Delphine (2017) Inhomogeneity of plastic deformation in austenitic stainless steel after surface mechanical attrition treatment. Surface & Coatings Technology, 329. pp. 202-211. ISSN 0257-8972

Bamber, R. and Dhillon, B. and Garwood, R. and Maden, P. and Neighbour, Gareth B and Pickford, C. and Shelton, P. and Smith, D. and Wallis, S. (2010) Foundation Degree Framework Specification for the Oil Refining and Petrochemicals Sector. Cogent SSC Ltd..

Barba-Piña, J. L. A. and Burns, A. and Mao, X. and Khatir, Zinedine (2021) Numerical Study of Thermophoresis Mass Transport in Binary Fluid Mixtures Using OpenFOAM. In: ChemEngDayUK 2021, 7th - 8th April 2021, University of Bradford. (Unpublished)

Baxter, H. and Neighbour, Gareth B (2012) The potential for the production of effective carbonaceous absorbers from waste material. In: 18th Annual International Sustainable Development Research Conference, 24-26 June 2012.

Bennett, S. and Coote, L. and Neighbour, Gareth B and Scott, G. and Taghzouit, J. (2008) Grading Criteria , a Tool for Student Progression. In: Learning and Teaching Conference “Transition to Higher Education”, 17th January 2008, University of Hull.

Bowes, Denise and Arnold, Sarah (2009) The engineering and construction contract and its implications for project programming procedures. In: Proceedings 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK. ARCOM, pp. 697-706. ISBN 978-0-9552390-1-4

C

Chen, Chen and Zhong, Chongquan and Wu, Wenyan (2014) Modelling and compilation method for multi-PLC control program. International Journal of Modelling, Identification and Control, 22 (3). pp. 225-235. ISSN 1746-6172

Cheneler, D. and Ward, Michael (2018) Active Thermal Sensor for Improved Distributed Temperature Sensing in Haptic Arrays. Journal of Sensors, 2018 (963123). pp. 1-14. ISSN 1687-725X

Cheneler, David and Ward, Michael (2015) Power output and efficiency of beta-emitting microspheres. Radiation Physics and Chemistry, 106. pp. 204-212. ISSN 0969-806X

Cole, M. and Green, R. and Neighbour, Gareth B and James, G. (2012) Foundation Degree Framework specification for the Chemicals Sector. Cogent SSC Ltd.

Cooper, Frank (2021) Anglo-Saxon bling — a warrior king’s Golden Helmet. Gold Bulletin. ISSN 2190-7579

Cooper, Frank (2016) Do the New, Low-Cost Photopolymer 3D Printers Now Becoming Available Have a Place in the Jewelry Manufacturing Environment? In: Santa Fe Symposium, Albuquerque NM USA.

Cornish, Richard (2018) Interior noise and electric vehicles-an experimental survey. In: Electric Vehicle NVH - not as quiet as you thought?, June 21st 2018, Coventry. (Unpublished)

Cox, Sharon and Wu, Wenyan (2018) Sensing Noise as an Information Object in Socio-Technical Environmental Monitoring. In: IEEE sensor conference, 28 October to 1 Novemeber 2018, New Delhi India.

D

De Serio, D. and de Oliveira, Alex and Sodre, Jose Ricardo (2017) Effects of EGR rate on performance and emissions of a diesel power generator fueled by B7. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (6). pp. 1919-1927. ISSN 1678-5878

Deutz, P. and McGuire, M. and Neighbour, Gareth B (2013) Eco-design practice in the context of a structured design process: an interdisciplinary empirical study of UK manufacturers. Journal of Cleaner Production, 39. pp. 117-128. ISSN 09596526 (ISSN)

Deutz, P. and Neighbour, Gareth B (2011) Diverting design: the realities of zero waste UK style and the role of ecodesign in achieving them. International Sustainable Development Research Society Newsletter.

Deutz, P. and Neighbour, Gareth B and McGuire, M. (2009) Incorporation of Environmental Regulations in Product Design. In: 15th Annual International Sustainable Development Research Conference, 5-8th July 2009, Utrecht, Netherlands.

Deutz, P. and Neighbour, Gareth B and McGuire, M. (2010) Integrating Sustainable Waste Management into Product Design: Sustainability as a Functional Requirement. Sustainable Development, 18 (4). pp. 229-239. ISSN 1099-1719

Deutz, P. and Neighbour, Gareth B and McGuire, M. (2008) Integrating product design in sustainable waste management. In: 14th Annual International Sustainable Development Research Conference, 21-23 September, 2008, New Delhi.

Deutz, P. and Neighbour, Gareth B and McGuire, M. (2011) An empirical study on the interplay of eco-design practice and theory in UK large companies. In: 17th Annual International Sustainable Development Research Conference, 8-10 May 2011, New York.

Deutz, P. and Neighbour, Gareth B and McGuire, M. and Baxter, H. (2010) Practice and potential of eco-design for sustainable waste management: an empirical study of UK based manufacturers. In: 16th Annual Sustainable Development Conference, 30 May – 1 June 2010, Hong Kong.

E

Edwards, D.J. and Holt, Gary D. (2014) Antecedents of Health and Safety Issues Relating to Plant Trailer Wheels. Journal of Construction Engineering and Management, 140 (7). 04014027. ISSN 0733-9364

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) Investigation Of Natural Convection Characteristics With Brownian Motion Effect Using Different Nanofluids. Multiphase Sciences and Technology, 30 (2-3). pp. 135-152. ISSN 0276-1459

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2015) Investigation of Enhancement of Heat Transfer in Natural Convection Utilizing of Nanofluids. International Journal of Mechanical and Mechatronics Engineering, 9 (2). ISSN 2077-124X

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2017) Investigation of the Flow Characteristics of Titanium - Oxide - Water Nanofluid in Microchannel with Circular Cross Section. American Journal of Nano Research and Applications, 5 (6). pp. 102-109. ISSN 2575-3738

Etaig, Saleh and Hasan, Reaz and Perera, Noel (2018) A New Effective Viscosity Model for Nanofluids. International Journal of Numerical Methods for Heat and Fluid Flow, 28 (3). pp. 571-583. ISSN 0961-5539

F

Fan, Y L and Perera, Noel and Tan, Kian (2019) An integrated experimental and numerical method to assess the fatigue performance of recycled rail. Journal of Mechanical Engineeering and Sciences, 13 (4). pp. 5988-6006. ISSN 2289-4659

Fancey, Kevin and Fazal, Adnan (2016) Prestressed polymeric matrix composites: Longevity aspects. Polymer Composites, 37 (7). pp. 2092-2097. ISSN 0272-8397

Feldman, Gerald and Shah, Hanifa and Chapman, Craig and Amini, Ardavan (2016) Technological, Organisational and Environmental Drivers for Enterprise Systems Upgrade. Industrial Management & Data Systems, 116 (8). pp. 1636-1655. ISSN 0263-5577

Ferreira, M.F. and Bradley, A. and Toso, A. and Neighbour, Gareth B (2016) Formula E: The New Class. Benchmark Mineral Intelligence. pp. 60-67.

Filimonov, Maxim and Oraifige, Ilias and Vijay, Venkatesh Chennam (2020) A novel graph-based modelling approach for reducing complexity in model-based systems engineering environment. International Journal of System of Systems Engineering, 10 (2). ISSN 1748-0671

Fletcher, David and Cooper, Frank (2018) The Precious Project: Polishing and Finishing of Additive Manufacturing (AM) Jewelry. In: Thirty-Second Santa Fe Symposium, 20th - 23rd May 2018, Albuquerque New Mexico.

Flynn, Dominic and Hemida, Hassan and Baker, Chris (2016) On the effect of crosswinds on the slipstream of a freight train and associated effects. Journal of Wind Engineering and Industrial Aerodynamics, 156 (Sep-16). pp. 14-28. ISSN 0167-6105

Flynn, Dominic and Hemida, Hassan and Soper, David and Baker, Chris (2014) Detached-eddy simulation of the slipstream of an operational freight train. Journal of Wind Engineering and Industrial Aerodynamics, 132 (Sep-14). pp. 1-12. ISSN 0167-6105

Fu, Yang and Wu, Wenyan (2017) Behavioural Informatics for Improving Water Hygiene Practice based on IoT Environment. Journal of Biomedical Informatics, 78 (2018). pp. 156-166. ISSN 1532-0464

Fu, Yang and Wu, Wenyan (2016) Predicting household water use behaviour for improved hygiene practices in internet of things environment via dynamic behaviour intervention model. IET Networks, 5 (5). pp. 143-151. ISSN 2047-4954

Fu, Yang and Wu, Wenyan and Gao, Jinliang (2015) Simulation and conservation of the end use water based on behaviour intervention modelling. Procedia Engineering, 119 (2015). pp. 761-770. ISSN 1877-7058, ESSN: 1877-7058

G

Gao, Jinliang and Zheng, Chengzhi and Wu, Wenyan and Qi, Shihua and Xu, Xiaoming (2015) Does Pressure Reduction Test have Significant Effect on Evaluating Pressure Management to Reduce Physical Leakage Amount. Procedia Engineering, 119 (2015). pp. 1020-1029. ISSN 1877-7058

Gbededo, Mijoh A. and Liyanage, K. and Oraifige, Ilias (2016) Simulation Aided Life Cycle Sustainability Assessment Framework for Manufacturing Design and Management. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (7).

Guéniat, Florimond and Mathelin, Lionel and Pastur, Luc (2015) A dynamic mode decomposition approach for large and arbitrarily sampled systems. Physics of Fluids, 27 (2). ISSN 1070-6631

Guéniat, Florimond and Mathelin, Lionel and Yousuff Hussaini, M (2016) A statistical learning strategy for closed-loop control of fluid flows. Theoretical and Computational Fluid Dynamics, 30 (6). pp. 497-510. ISSN 0935-4964

Guéniat, Florimond and Pastur, Luc and Lusseyran, Francois (2014) Investigating mode competition and three-dimensional features from two-dimensional velocity fields in an open cavity flow by modal decompositions. Physics of Fluids, 26 (8). ISSN 1070-6631

H

Hamad, Hazim S. and Kapur, N. and Khatir, Zinedine and Querin, Osvaldo and Thompson, H. M. and Wilson, M. C. T. (2021) CFD-Enabled Optimization of Polymerase Chain Reaction Thermal Flow Systems. In: 16th UK Heat Transfer Conference (UKHTC2019), 8th - 10th September 2019, University of Nottingham.

Hamad, Hazim S. and Kapur, Nik and Khatir, Zinedine and Querin, O.M. and Thompson, Harvey M. and Wang, Yongxing and Wilson, Mark (2020) Computational fluid dynamics analysis and optimisation of polymerase chain reaction thermal flow systems. Applied Thermal Engineering, 183 (116122). ISSN 1359-4311

Han, Xingsi and Yang, Junfeng and Mao, Junkai (2016) LES investigation of two frequency effects on acoustically forced premixed flame. Fuel, 185. pp. 449-459. ISSN 0016-2361

Higgison, G.H. and Neighbour, Gareth B (2015) Creating an Integrated Curriculum for a STEM Discipline. In: International Conference on New Perspectives in Science Education, Florence, Italy, March 2015.

Holt, Gary D. and Edwards, D.J. (2015) Analysis of interrelationships among excavator productivity modifying factors. International Journal of Productivity and Performance Management, 64 (6). pp. 853-869. ISSN 1741-0401

Holt, Gary D. and Owusu-Manu, De-Graft and Edwards, D.J. and Badu, Edward (2014) Determinants of trade credit supply among the Ghanaian construction sector. Built Environment Project and Asset Management, 4 (4). pp. 368-383. ISSN 2044-124X

Hu, Shiyuan and Gao, Jinliang , and Wu, Wenyan (2018) Experiment and Simulation of Ferrous Ions Diffusion at the Dead-end Branch Pipes of Water Distribution System. In: International Joint Conference in Water Distribution Systems Analysis & Computing and Control in the Water Industry, 23-25 July 2018, Kingston Ontario Canada.

Hussain, Ambreen and Wu, Wenyan (2015) Implementation of OGC Compliant Framework for Data Integration in Water Distribution System. Procedia Engineering, 119 (2015). pp. 1366-1374. ISSN 1877-7058

Hussain, Ambreen and Wu, Wenyan (2017) Sustainable Interoperability and Data Integration for the IoT-Based Information Systems,. In: Internet of Things (iThings) and IEEE Green Computing and Communications (GreenCom) and IEEE Cyber, Physical and Social Computing (CPSCom) and IEEE Smart Data (SmartData), 2017 IEEE International Conference on. IEEE, pp. 824-829. ISBN 978-1-5386-3066-2

I

Idrissi, Moad and Annaz, Fawaz and Salami, Mohammad R (2021) Mathematical & Physical Modelling of a Quadrotor UAV. In: 2021 7th International Conference on Control, Automation and Robotics (ICCAR), 23-26 April 2021, Singapore.

Ioannidou, Vasiliki G. and Pearson, Jonathan M. (2018) Hydraulic & Design Parameters in Full-Scale Constructed Wetland & Treatment Units: Six Case Studies. Environmental Processes. pp. 1-18. ISSN 2198-7491

Ismaeel, Muyassar E. and Kapur, N. and Khatir, Zinedine and Thompson, H. M. (2021) Robust Optimisation of Serpentine Fluidic Heat Sinks for High-Density Electronics Cooling. In: 16th UK Heat Transfer Conference (UKHTC2019), 8th - 10th September 2019, University of Nottingham.

Issartel, Paul and Guéniat, Florimond and Isenberg, Tobias and Ammi, Mehdi (2017) Analysis of Locally Coupled 3D Manipulation Mappings Based on Mobile Device Motion. Presence: Teleoperators and Virtual Environments, 26 (1). pp. 66-95. ISSN 1054-7460

Iyi, D. and Hasan, Reaz and Penlington, Roger (2018) Experimental and numerical study of Buoyancy-driven low turbulence flow in rectangular enclosure partially filled with isolated solid blockages. International Journal of Heat and Mass Transfer, 127 (B). pp. 534-545. ISSN 0017-9310

Iyi, Draco and Hasan, Reaz (2019) Numerical Investigation of the Effect of Moisture on Buoyancy-driven Low Turbulence Flow in an Enclosed Cavity. International Journal of Heat and Mass Transfer, 136 (Jun-19). pp. 543-554. ISSN 0017-9310

Iyi, Draco and Hasan, Reaz and Underwood, Chris and Penlington, Roger (2014) Double skin façade: Modelling technique and influence of venetian blinds on the airflow and heat transfer. Applied Thermal Engineering, 71 (1). pp. 219-229. ISSN 1359-4311

J

Jin, Xi and Wu, Wenyan (2015) Merged two-level optimization for optimal pump operation of large scale urban water distribution system. Journal of Water Supply: Research and Technology, 64 (8). pp. 915-926. ISSN 0003-7214

K

Kara-Mohamed, Mohamed and Heath, William (2016) Classical Tuning of Force Feedback Control for Nanopositioning Systems with Load Variations. IFAC-PapersOnLine, 49 (21). pp. 649-655. ISSN 1474-6670

Kara-Mohamed, Mohamed and Heath, William (2016) Tuning and Testing Dual Sensor Technology in Digital Implementation for Single-Axis Nanopositioning Stages. In: 16th International Conference & Exhibition, 30th May - 3rd June 2016, University of Nottingham, UK.

Kara-Mohamed, Mohamed and Heath, William and Lanzon, Alexander (2015) Enhanced Tracking for Nanopositioning Systems Using Feedforward/Feedback Multivariable Control Design. IEEE Transactions on Control Systems Technology, 23 (3). pp. 1003-1013.

Kara-Mohamed, Mohamed and Heath, William and Lanzon, Alexander (2014) Feedforward/feedback multivariable control design for high speed nanopositioning. In: European Control Conference 2014, Strasborg.

Karayath, S.S. and Neighbour, Gareth B and Robson, P. and Gilbert, J.M. (2010) Implementing Lean in Sub-EBQ Manufacturing Environments: A Case Study. In: Second European Conference on Continuous Improvement and Lean, 18-20 January 2010, Six Sigma, Glasgow.

Kashani, Mohammad M and Salami, Mohammad R and Goda, Katsuichiro and Alexander, Nicholas A. (2018) Non-linear flexural behaviour of RC columns including bar buckling and fatigue degradation. Magazine of Concrete Research, 70 (5). pp. 231-247. ISSN 0024-9831

Khatir, Zinedine and Hanson, Bruce and Fairweather, Michael and Peter J., Heggs (2017) CFD Analysis of Liquid-Liquid Extraction Pulsed Sieve-Plate Extraction Columns. In: 27th European Symposium on Computer Aided Process Engineering, 1st-5th October 2017, Barcelona, Spain.

Khatir, Zinedine and Kubiak, K.J. and Jimack, P.K. and Mathia, T.G. (2016) Dropwise condensation heat transfer process optimisation on superhydrophobic surfaces using a multi-disciplinary approach. Applied Thermal Engineering, 106 (5/8/16). pp. 1337-1344. ISSN 1359-4311

Kipling, G. and Easton, A. and Neighbour, Gareth B (2010) Biaxial Testing: Appropriate for Mechanical Characterisation? In: Securing the Safe Performance of Graphite Reactor Cores. Royal Society of Chemistry, pp. 152-160. ISBN 978-1-84755-913-5

Kipling, G. and Easton, A. and Neighbour, Gareth B (2008) Biaxial Testing: Appropriate for Mechanical Characterisation? In: Programme and Abstracts, Conference on Securing the Safe Performance of Graphite Reactor Cores, 24-26th November 2008, EMCC, University of Nottingham.

Kipling, G. and Neighbour, Gareth B (2010) A New Methodology for Modelling the Failure Characteristics of Nuclear Graphites. In: Proceedings of 2010 International Conference on Carbon. American Carbon Society.

Kipling, G. and Neighbour, Gareth B (2011) Novel FEA Methods for Predicting Fracture Characteristics in Nuclear Graphite. In: Proceedings of International Conference on Carbon. International Conference on Carbon.

Kipling, G. and Neighbour, Gareth B and Smith, R.E. and Sowa, G. (2011) Evaluation of Three Graphite’s Using X-ray Tomography. In: Proceedings of International Conference on Carbon. International Conference on Carbon.

Kipling, G.D. and Easton, A. and Neighbour, Gareth B (2009) Biaxial Testing: Appropriate for Mechanical Characterisation? In: Proceedings of International Conference on Carbon. French Carbon Society.

Kipling, G.D. and Neighbour, Gareth B (2009) Notes on the Preliminary Metallographic and Mechanical Characterisation of Stelex PrO Filters. Technical Report. HULL/ENG/NUC/R016.

Krzyzanowski, Michal (2014) Zachowanie się warstwy powierzchniowej stali i stopów aluminiowych w warunkach przeróbki na gorąco – metodyka badan, przykłady, Hutnik-Wiadomości Hutnicze. SIGMA-NOT, 4. pp. 14-27.

Krzyzanowski, Michal and Alaswad, Abed and Rentzelas, Panagiotis and Mavritsaki, Eirini and Leyland, Laura and Sodre, Jose Ricardo and Annaz, Fawaz and Pendry, Alan and Shaw, Clayton and Cornish, Richard (2017) BCU Magnesium Symposium 2017 Abstract Booklet. In: The BCU Magnesium Symposium, Thursday 20 July 2017, Birmingham City University. (Unpublished)

Krzyzanowski, Michal and Bajda, Szymon and Liu, Yijun and Triantaphyllou, A. and Rainforth, W. Mark and Glendenning, M. (2016) 3D analysis of thermal and stress evolution during laser cladding of bioactive glass coatings. Journal of the Mechanical Behavior of Biomedical Materials, 59. pp. 404-417. ISSN 1751-6161

Krzyzanowski, Michal and Bajda, Szymon and Rainforth, W. Mark (2014) Combining nanocrystallisation processes with a subsequent thermomechanical processing – interfacial oxidation. Proc. 2nd International Conference of the International Journal of Structural Integrity - IJSI 2014.

Krzyzanowski, Michal and Bajda, Szymon and Rainforth, W. Mark (2015) Interface oxidation in combined nanocrystallisation proceses involving subsequent thermomechanical processing. Proc. PLASTICITY’15: 21st Int. Symposium on Plasticity and its Current Applications. pp. 70-72.

Krzyzanowski, Michal and Benyon, J. (2016) Interfacial heat transfer during hot metal forming operations assuming scale failure effects. Materials Science and Technology, 32 (5). pp. 407-417. ISSN 0267-0836

Krzyzanowski, Michal and Svyetlichnyy, D. and Stevenson, G. and Rainforth, W. Mark (2016) Powder bed generation in integrated modelling of additive layer manufacturing of orthopaedic implants. Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Kulkarni, S.S. and Edwards, D.J. and Pärn, E.A. and Chapman, C. and Aigbavboa, C. and Cornish, R. (2018) Evaluation of vehicle lightweighting to reduce greenhouse gas emissions with focus on magnesium substitution. Journal of Engineering, Design and Technology, 16 (6). pp. 869-888. ISSN 1726-0531

Kwiecien, M and Lisiecki, L. and Bajda, Szymon and Majta, J. and Krzyzanowski, Michal (2016) Metallic Multilayered Materials Produced by Constrained Compression. Key Engineering Materials, 715. pp. 225-231. ISSN 1662-9809

L

Li, Shanshan and Wang, Ronghe and Wu, Wenyan and sun, jilong and Jing, yanlong (2015) Non-hydraulic factors analysis of pipe burst in water distribution systems. Procedia Engineering, 119. pp. 53-62. ISSN 1877-7058, ESSN: 1877-7058

Li, Tian and Hemida, Hassan and Zhang, Jiye and Rashidi, Mohammad and Flynn, Dominic (2018) Comparisons of Shear Stress Transport and Detached Eddy Simulations of the Flow Around Trains. Journal of Fluids Engineering, 140 (11). ISSN 0098-2202

Li, Yuanzhe and Gao, Jinliang and Wu, Wenyan (2018) Leakage discharge separation in multi-leaks pipe networks based on improved Independent Component Analysis with Reference (ICA-R) algorithm. In: International Joint Conference in Water Distribution Systems Analysis & Computing and Control in the Water Industry, 23-25 July 2018, Kingston Ontario Canada.

Lloyd, C. and Dey, P. (2014) Supply chain integration in the UK bioenergy industry: Findings from a pilot study. Journal of Cleaner Production, 79. pp. 41-52. ISSN 09596526 (ISSN)

Love, P.E.D. and Edwards, D.J. and Smith, J. (2013) Systemic life cycle design error reduction model for construction and engineering projects. Structure and Infrastructure Engineering, 9 (7). pp. 689-701. ISSN 15732479 (ISSN)

Love, Peter E. D. and Edwards, D.J. and Irani, Zahir and Forcada, Nuria (2014) The latent causes of rework in floating production storage and offloading projects. Journal of Civil Engineering and Management, 20 (3). pp. 315-329. ISSN 1392-3730

Lu, Yiling and Li, Wei-Qi and Oraifige, Ilias and Wang, Wen (2014) Converging parallel plate flow chambers for studies on the effect of the spatial gradient of wall shear stress on endothelial cells. Journal of Biosciences and Medicines, 2. pp. 50-56. ISSN 2327-5081

Lu, Yiling and Li, Wei-Qi and Oraifige, Ilias and Wang, Wen (2014) Design of parallel plate flow chambers and endothelial cell response. In: Spring Congress on Engineering and Technology, April, 2014, Shanghai, China.

M

Mahmoud, Haitham and Wu, Wenyan (2020) Cyber-Physical System Security Open Challenges in Smart Water Networks. In: 17th International Computing & Control for the Water Industry Conference, 1-4 September 2019, Exeter UK.

Mahmoud, Haitham and Wu, Wenyan and Wang, Y. (2019) Secure Data Aggregation Mechanism for Water Distribution System using Blockchain. In: The 25th International Conference on Automation & Computing, Lancaster University, Lancaster UK, 5-7 September 2019, 5-7 September 2019, Lancaster UK.

Mahmoud, Haitham and Wu, Wenyan and Wang, Yonghao (2021) WDSchain: A Toolbox for Enhancing the Security Using Blockchain Technology in Water Distribution System. Water, 13 (14). ISSN 2073-4441

Manuwong, G. and Kipling, G. and Neighbour, Gareth B (2012) Quantitative Microstructure Characterisation of Advanced Carbons Using Image Analysis. In: Modelling and Measuring Reactor Core Graphite Properties and Performance. Royal Society of Chemistry, Cambridge, UK. ISBN 978-1-84973-517-9

Manuwong, T. and Kipling, G.D. and Neighbour, Gareth B (2011) Quantitative Microstructure Characterisation of Advanced Carbons Using Image Analysis. In: Conference on Modelling and Measuring Reactor Core Graphite Properties and Performance, 31st October – 3rd November 2011, Aston University, Birmingham.

McGuire, M.A. and Neighbour, Gareth B (2010) Pyrolysis of Carbon-based Waste Materials – A Review. In: Proceedings of 2010 International Conference on Carbon. American Carbon Society.

McGuire, M.A. and Neighbour, Gareth B and Price, R. (2010) Should subjective risk be taken into account in the design process for graphite disposal? In: Securing the Safe Performance of Graphite Reactor Cores. Royal society of Chemistry, pp. 229-241. ISBN 978-1-84755-913-5

McGuire, M.A. and Neighbour, Gareth B and Price, R. (2009) Should subjective risk be taken into account in the design process for graphite disposal? In: Programme and Abstracts, Conference on Securing the Safe Performance of Graphite Reactor Cores, 24-26th November 2008, EMCC, University of Nottingham.

Mohammadzaheri, Morteza and Amouzadeh, Amirhosein and Doustmohammadi, Mojtaba and Emadi, Mohammadreza and Jamshidi, Ehsan and Ghodsi, Mojtaba and Soltani, Payam (2021) Fuzzy Analysis of Resonance Frequencies for Structural Inspection of an Engine Cylinder Block. Fuzzy Information and Engineering. ISSN 1616-8666

N

Naylor, Andrew and Hackney, Philip and Perera, Noel and Clahr, Emil (2012) A predictive model for the cutting force in wood machining developed using mechanical properties. Bioresources, 7 (3). pp. 2883-2894. ISSN 1930-2126

Neighbour, Gareth B (2015) Carbon: Past and Future perspectives. In: The Many Faces of Carbon – Spring Meeting of the British Carbon Group, 16th April 2015, Southampton.

Neighbour, Gareth B (2011) How can small scale strength measurements on irradiated graphite be applied to large scale? In: British Energy – Part of EDF Symposium on Graphite Fracture, 11th – 13th April 2011, Mansfield College, University of Oxford.

Neighbour, Gareth B (2009) Independent Technical Assessment of Serco’s Critical Review of Technical Assessment Guide for Graphite Reactor Cores. Technical Report. HULL/ENG/NUC/R015, Serco Assurrance plc..

Neighbour, Gareth B (2014) Is Inclusive Assessment a Different Paradigm to Authentic Assessment or Learner Centric Practice? In: Inclusive Assessment in Practice Conference, 24th November 2014, Higher Education Academy, Plymouth.

Neighbour, Gareth B (2008) Mechanical Characterisation and Scale of Data Used in Assessments. In: FESI – UK Forum for Engineering Structural Integrity. Understanding Quasi-Brittle Material and its Behaviour through Modelling and Probabilistic Approaches, 5th June 2009, Royal Academy of Engineering.

Neighbour, Gareth B (2008) The Microstructure, Fracture and Modelling of Polygranular Graphite. In: GrafTech, June 23rd / 24th 2008, Cleveland, Ohio.

Neighbour, Gareth B (2011) Modelling Fracture in Graphite. In: FESI – UK Forum for Engineering Structural Integrity. Modelling Fracture in Quasi-Brittle Materials: Achieving Consistency Between Different Length Scales, 3rd March 2011, University of Manchester.

Neighbour, Gareth B (2015) Multi-scale structure / properties relationships in nuclear graphites at the workshop. In: Multi-scale structure & properties of bulk carbon materials: structure determination, physical & chemical properties characterisation, modelling from nm to m, 2015, Dresden.

Neighbour, Gareth B (2011) Nuclear Graphite: Microstructural and Modelling Experience and Lessons for the Future in the Performance of Components (Plenary Lecture). In: Anais Do V Congresso Brasileiro De Carbono - Brazillian Carbon Conference, 25th – 29th April 2011, Rio de Janeiro, Brazil.

Neighbour, Gareth B (2015) Nuclear Graphite: Past and Future perspectives. In: 5th Graphite & Graphene Conference, 8th-9th December 2015, Waldorf Hotel, London.

Neighbour, Gareth B (2011) Nuclear Graphite: The End of the Beginning? In: The graphite industry’s first dedicated international event: Graphite Conference’ organised by Industrial Minerals Events, 6-7th December 2011, Knightsbridge, London.

Neighbour, Gareth B (2010) Plant life management (PLiM) practices for gas-cooled, graphite-moderated nuclear reactors: UK experience. In: Understanding and mitigating ageing in nuclear power plants: Materials and operational aspects of plant life management (PLiM). Woodhead, Cambridge, UK, pp. 838-875. ISBN 978-1-84569-511-8

Neighbour, Gareth B (2011) Plenary Lecture – Nuclear Graphite: Microstructural and Modelling Experience and Lessons for the Future in the Performance of Components. In: Brazillian Carbon Conference - Anais Do V Congresso Brasileiro De Carbono, 25th – 29th April 2011, Rio de Janeiro, Brazil.

Neighbour, Gareth B (2008) Programme and Abstracts Book. In: Conference on Securing the Safe Performance of Graphite Reactor Cores, 24-26th November 2008, EMCC, University of Nottingham.

Neighbour, Gareth B (2011) Programme and Abstracts Book. In: Conference on Modelling and Measuring Reactor Core Graphite Properties and Performance, 31st October – 3rd November 2011, Aston University, Birmingham.

Neighbour, Gareth B (2010) Securing the Safe Performance of Graphite Reactor Cores. RSC Publishing (Royal Society of Chemistry, Cambridge). ISBN 978-1-84755-913-5

Neighbour, Gareth B and Baxter, H. (2011) Activated carbon for water treatment systems. Water and Sewerage Journal, 3. pp. 27-29.

Neighbour, Gareth B and Kipling, G. and Lynch, C. and Holt, M. (2011) Modelling Fracture in Graphite. Workbook for FESI – UK Forum for Engineering Structural Integrity. In: Modelling Fracture in Quasi-Brittle Materials: Achieving Consistency Between Different Length Scales, 3rd March 2011, University of Manchester.

Neighbour, Gareth B and Lynch, C. and Holt, M. (2008) Modelling the Fracture of Nuclear Graphite with Scale. In: Proceedings of International Conference on Carbon. Japanese Carbon Society.

Neighbour, Gareth B and McGuire, M. (2011) Waste, limiting environmental impact and carbon materials: an opportunity? In: Knowledge Transfer Network (FP7 Marie Curie IAPP MONACO-EXTRA Project 218242) & British Carbon Group, 22nd & 23rd September 2011, University of Brighton, UK.

Neighbour, Gareth B and McGuire, M.A. (2010) Aspects of Graphite Disposal and the Relationship to Risk: A Socio-Technical Problem. In: Progress in Radioactive Graphite Waste Management (Proceedings). IAEA, Vienna. ISBN 978-92-0-106610-7

Niklaou, Andreas and Booth, Peter and Gordon, Fraser and Yang, Junfeng and Matar, O.K. and Chachuat, Benoit (2016) Multi-Physics Modeling of Light-Limited Microalgae Growth in Raceway Ponds. IFAC-PapersOnLine, 49 (26). pp. 324-329.

O

Oikonomou, Efstathios K. and Ioannidou, Vasiliki G. (2014) Implementation and evaluation of water hammer software in flow problems in irrigation networks. In: International Conference on Environmental Management, Engineering, Planning and Economics, 24th-28th June 2013, Greece.

Olanrewaju, Oludolapo Ibrahim and Kineber, Ahmed Farouk and Chileshe, Nicholas and Edwards, David J. (2021) Modelling the Impact of Building Information Modelling (BIM) Implementation Drivers and Awareness on Project Lifecycle. Sustainability, 13 (16). e8887. ISSN 2071-1050

Ozoemena, M and Cheung, W.M. and Hasan, Reaz (2017) Comparative LCA technology improvement opportunities for a 1.5 MW wind turbine in the context of an offshore wind farm. Clean Technologies and Environmental Policy, 20 (1). pp. 173-190. ISSN 1618-954X

Ozoemena, Matthew and Hasan, Reaz and Cheung, Wai Ming (2016) Analysis of Technology Improvement Opportunities for a 1.5MW Wind Turbine using a Hybrid Stochastic Approach in Life Cycle Assessment. Renewable Energy, 93 (August). pp. 369-382. ISSN 0960-1481

P

Parra-Santiago, Jonathan and Guerrero-Fajardo, Carlos Alberto and Sodre, Jose Ricardo (2015) Distillation process optimization for styrene production from a styrene-benzene-toluene system in a Petlyuk column. Chemical Engineering & Processing: Process Intensification, 98. pp. 106-111. ISSN 0255-2701

Patlakas, Panagiotis and Koronaios, Georgios and Raslan, Rokia and Neighbour, Gareth B and Altan, Hasim (2017) Case Studies of Environmental Visualization. Energies, 10 (10). ISSN 1996-1073

Pendry, Alan (2018) Magnesium Alloy Die Casting Process Improvement using the Single Minute Exchange of Dies (SMED) Method and Other Techniques. In: Mg2018: Proceedings of the 11th International Conference on Magnesium Alloys and Their Applications. Brunel University Press, UK, pp. 81-85. ISBN 9781908549372

Perera, Noel (2019) Sustainable energy, engineering, materials and environment: current advances and challenges. Environmental Science and Pollution Research. ISSN 0944-1344

Pivot, Charles and Mathelin, Lionel and Guéniat, Florimond (2017) A continuous reinforcement learning strategy for closed-loop control in fluid dynamics. In: 35th AIAA Applied Aerodynamics Conference, AIAA AVIATION Forum, (AIAA 2017-3566), Denver, Colorado.

R

Radhakrishnan, Varsha and Wu, Wenyan (2018) IoT technology for smart Water system. In: The 16th IEEE International Conference on Smart City (SmartCity-2018), 28-30 June 2018, Exeter UK.

Radhakrishnan, Varsha and Wu, Wenyan (2019) Wireless powered communication network in IoT enabled water distribution system. In: 17th International Computing & Control for the Water Industry Conference, 1-4 September, Exeter UK.

Rafi, Arqam and Lee, Timothy and Wu, Wenyan (2019) Impact of low-carbon technologies on the power distribution network. IOP Conference Series: Earth and Environmental Science, 329 (012055). ISSN 1755-1307

Rahma, Elsiddig and Perera, Noel and Tan, Kian (2016) Impact of oil price shocks on Sudan's government budget. International Journal of Energy Economics and Policy, 6 (2). pp. 243-248. ISSN 2146-4553

Raju, Pathmeswaran and Ahmed, V. (2016) Design Science Methodology for Developing a Learning Object Repository for Construction. In: Research Methodology in the Built Environment: A Selection of Case Studies. Routledge. ISBN 9781138849464

Raju, Pathmeswaran and Feldman, Gerald (2017) Exploiting E-Commerce in Construction. In: Advances in Construction ICT and E-Business. Routledge. ISBN 9781138914582

Ramadan, Ahmed and Hasan, Reaz and Penlington, Roger (2018) Zero-dimensional transient model of large-scale cooling ponds usingwell-mixed approach. Annals of Nuclear Energy, 114. pp. 342-353. ISSN 0306-4549

Roberts, C.J. and Edwards, D.J. and Hosseini, M. Reza and Mateo-Garcia, Monica and Owusu-Manu, De-Graft (2019) Post-occupancy evaluation: a review of literature. Engineering, Construction and Architectural Management. ISSN 0969-9988

Rodrigues de Almeida, P. and Nakamura, A.L. and Sodre, Jose Ricardo (2014) Evalution of catalytic converter ageing for vehicle operation with ethanol. Applied Thermal Engineering, 71. pp. 335-341. ISSN 1359-4311

Rodriguez, Cristina and Alaswad, A. and Hassan, Z.El and Olabi, A.G. (2017) Improvement of methane production from P. canaliculata through mechanical pretreatment. Renewable Energy, 119. pp. 73-78. ISSN 0960-1481

Rodriguez, Cristina and Alaswad, A. and Hassan, ZakiEl and Olabi, A.G. (2018) Waste paper and macroalgae co-digestion effect on methane production. Energy, 154. pp. 119-125. ISSN 0360-5442

Rotchell, J.M. and Neighbour, Gareth B and Mayes, W. (2011) Beneficial or detrimental biological effects of very low dose ionizing radiation exposure? Developing analytical tools to help decide. In: Humber Chemical Focus Research Showcase to Business, 4th May 2011, NEE.

S

Sadeghioon, A.M. and Walton, R. and Chapman, D. and Metje, N. and Anthony, C. and Ward, Michael (2014) Design and development of a nonintrusive pressure measurement system for pipeline monitoring. Journal of Pipeline Systems Engineering and Practice, 5 (3). ISSN 1949-1190

Sapkota, Krishna and Raju, Pathmeswaran and Chapman, Craig and Byrne, William and Melville, L. (2015) Bioenergy Ontology for Automatic Pathway Generation. International Journal of Knowledge Engineering-IACSIT, 1 (1). pp. 1-8. ISSN 23826185

Shahra, Essa and Wu, Wenyan (2019) Dynamic Water Quality Sensor Placement Using Metaheuristic Algorithm on Water Distribution System. In: 17th International Computing & Control for the Water Industry Conference, 1-3 September, Exeter UK.

Shahra, Essa and Wu, Wenyan (2020) Water Contaminants Detection Using Sensor Placement Approach in Smart Water Networks. Journal of Ambient Intelligence and Humanized Computing. pp. 1-16. ISSN ISSN 1868-5137

Shahra, Essa and Wu, Wenyan and Basurra, Shadi and Rizuo, Stamatia (2021) Deep Learning for Water Quality Classification in Water Distribution Networks. In: EANN 22nd International Conference on Engineering Applications of Neural Networks.

Shahra, Wenyan and Wu, Wenyan and Gomez, Roberto (2021) Human Health Impact Analysis of Contamination in Water Distributed Networks. Applied Sciences, 11 (8). ISSN 2076-3417

Sodre, Jose Ricardo and de Souza Brito, Rodrigo Teixeira and de Oliveira, Alex and de Morais, Andre Marcelino (2014) Simulation of diesel engine operation with ethanol to reduce pollutant emissions. Chemical Engineering & Processing: Process Intensification, 39. pp. 1165-1170. ISSN 2283-9216

Solanki, M. and Chapman, C. (2012) Conformance to standards. In: 3rd Workshop on Ontology Patterns, WOP 2012 - In Conjunction with the 11th International Semantic Web Conference 2012, ISWC 2012, 12 November 2012, Boston, MA; United States.

Solanki, M. and Chapman, C. (2012) Reactive processes. In: 3rd Workshop on Ontology Patterns, WOP 2012 - In Conjunction with the 11th International Semantic Web Conference 2012, ISWC 2012, 12 November 2012, Boston, MA; United States.

Soper, David and Flynn, Dominic and Baker, Chris and Jackson, Adam and Hemida, Hassan (2018) A comparative study of methods to simulate aerodynamic flow beneath a high-speed train. Proceedings of the Institution of Mechanical Engineers, part F: Journal of Rail and Rapid Transit, 232 (5). pp. 1464-1482. ISSN 0954-4097

Sroka, Jakub and Bajda, Szymon and Krzyzanowski, Michal and Rainforth, W. Mark (2015) Identification of scale failure parameters for low carbon steel oxides essential for hot rolling. Proc. The 6th Int. Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking - STEELSIM 2015.

Sroka, Jakub and Talamantes-Silva, Jesus and Krzyzanowski, Michal (2016) Modelling of Transient Temperature Field and Phase Transformation Change: A way for Residual Stress Management in Large Scale Forgings. Computer Methods in materials Science, 16 (2). p. 87. ISSN 1641-8581

Stiles, William A.V. and Styles, David and Chapman, Stephen P. and Esteves, Sandra and Bywater, Angela and Melville, L. and Silkina, Alla and Lupatsch, Ingrid and Grunewald, Claudio Fuentes and Lovitt, Robert and Chaloner, Tom and Bull, Andy and Morris, Chris and Llewellyn, Carole A. (2018) Using microalgae in the circular economy to valorise anaerobic digestate: challenges and opportunities. Bioresource Technology. ISSN 0960-8524

Stimson, Joshua and Ward, Michael and Diaz-Moreno, S. and Docker, P. and Kay, J. and Sutter, J. (2016) A thermal exploration of different monochromator crystal designs. In: Proceedings - Mechanical Engineering & Design of Synchrotron radiation equipment and Instrumentation conference. MEDSI. ISBN 9783954501885

Stimson, Joshua and Ward, Michael and Docker, P. and Sutter, J. and Diaz-Moreno, S. (2015) Analytical Model for Heat Absorption: Lessons Learned From a One Dimensional Model. In: Proceedings - Synchrotron Radiation Instrumentation conference. SRI.

Svyetlichnyy, D. and Straka, R. and Lach, L. and Krzyzanowski, Michal (2016) Application of Cellular Automata and Lattice Boltzmann methods for modelling of Additive Layer Manufacturing. In: IX International Conference on Computational Heat and Mass Transfer, 23-26 May 2016, Krakow.

Svyetlichnyy, Dmytro and Krzyzanowski, Michal and Straka, R. and Lach, L. and Rainforth, W. Mark (2018) Application of Cellular Automata and Lattice Boltzmann Methods for modelling of Additive Layer Manufacturing. International Journal of Numerical Methods for Heat and Fluid Flow, 28 (1). pp. 31-46. ISSN 0961-5539

shahra, Essa and Wu, Wenyan and Romano, Michele (2020) Considerations on the Deployment of Heterogeneous IoT Devices For Smart Water Networks. In: the 16th IEEE International Conference on Ubiquitous Intelligence and Computing (UIC 2019)., 19-23 August 2019, Leicester UK.

T

Taha, Ahmad and Wu, Ruiheng and Emeakaroha, Anthony and Krabicka, Jan (2018) Reduction of Electricity Costs in Medway NHS by Inducing Pro-Environmental Behaviour Using Persuasive Technology. Future Cities and Environment, 4 (1). ISSN 2363-9075

Tang, Zhaozhao and Wu, Wenyan and Gao, Jinliang (2021) A Multi-Iteration Enhanced 2P-SMA Method for Improved Error Reduction on a WP-SAW Water Temperature and Pressure Sensor. IEEE ACCESS, 9. pp. 48236-48243. ISSN 2169-3536

Tang, Zhaozhao and Wu, Wenyan and Gao, Jinliang (2018) A Wireless Passive SAW Delay Line Temperature and Pressure Sensor for Monitoring Water Distribution System. In: IEEE sensors 2018, 30th-31st October 2018, New Delhi, India.

Tang, Zhaozhao and Wu, Wenyan and Gao, Jinliang and Yang, Po (2018) Feasibility Study on Wireless Passive SAW Sensor in IoT enabled Water Distribution System,. In: Internet of Things (iThings) and IEEE Green Computing and Communications (GreenCom) and IEEE Cyber, Physical and Social Computing (CPSCom) and IEEE Smart Data (SmartData), 2017 IEEE International Conference on. IEEE, pp. 830-834. ISBN 978-1-5386-3066-2

Tang, Zhaozhao and Wu, Wenyan and Gao, Jinliang and Yang, Po (2018) SAW Delay Line based Smart Sensing in Water Distribution System. In: The 16th IEEE International Conference on Smart City (SmartCity-2018), 28-30 2018, Exeter UK.

Tang, Zhaozhao and Wu, Wenyan and Gao, jinliang (2015) Water Pressure Sensing based on Wireless Passive SAW Technology. Procedia Engineering, 119 (2015). pp. 892-900. ISSN 1877-7058, ESSN: 1877-7058

Tang, Zhaozhao and Wu, Wenyan and Han, Xiaoxi and Zhao, Ming (2017) An Experimental Study of Two-Phase Pulse Flushing Technology in Water Distribution Systems. Water, 9 (927). ISSN 2073-4441

Tang, Zhaozhao and Wu, Wenyan and Zhao, Ming (2020) Numerical Modelling and Simulation of Two-Phase Flow Flushing Method for Pipeline Cleaning in Water Distribution Systems. Water, 12 (9) (2470). ISSN 2073-4441

Taylor, T. and Danks, S. and Fourlaris, Georgios (2016) Dynamic Tensile Testing of Ultrahigh Strength Hot Stamped Martensitic Steels. Steel Research International, 88 (3). ISSN 1611-3683

Taylor, T. and Fourlaris, Georgios and Cafolla, J. (2016) Finite Element Modelling Full Vehicle Side Impact with Ultrahigh Strength Hot Stamped Steels. Journal of Materials Engineering and Performance, 25 (10). pp. 4495-4505. ISSN 1059-9495

Taylor, T. and Fourlaris, Georgios and Evans, P. (2016) Development of carbon–manganese–chromium steels for automotive hot stamping technologies. Materials Science and Technology, 33 (4). pp. 487-496. ISSN 0267-0836

Taylor, T. and Fourlaris, Georgios and Evans, P. and Bright, G. (2013) New generation ultrahigh strength boron steel for automotive hot stamping technologies. Materials Science and Technology, 30 (7). pp. 818-826. ISSN 0267-0836

Thakur, Nikhil (2019) Advanced cost models for application in composite aero-engine components. Post-Doctoral thesis, Birmingham City University.

Thakur, Nikhil and Chapman, C. and Raju, P. and Chinchapatnam, Phani (2016) Using Knowledge-based Engineering (KBE) In Cost Estimation For A Composite Material Part: A Review. In: IVTH INTERNATIONAL CONFERENCE ON PRODUCTION AND INDUSTRIAL ENGINEERING, CPIE-2016, JALANDHAR.

Thakur, Nikhil and Raju, P. and Krzyzanowski, Michal and Chinchapatnam, Phani (2017) Combined Life-Cycle Including Carbon Footprint for Composite Materials. International Journal of Research in Mechanical Engineering & Technology, 7 (2). pp. 157-161. ISSN 2249-5770

Thomas, Andrew M. and Vijay, Venkatesh Chennam and Raju, Pathmeswaran and Chapman, Craig and Chima, Parmjit and Mathur, Alok and Chemaly, Adel (2013) Parametric virtual laboratory development: A hydropower case study with student perspectives. Advances in Engineering Software, 64. pp. 62-70. ISSN 09659978

Trehan, Vibhor (2019) A process model in platform independent and neutral formal representation for design engineering automation. Doctoral thesis, Birmingham City University.

V

Vijay, Venkatesh Chennam and Lees, M. and Chima, P. and Chapman, C. and Raju, P. (2015) Knowledge based educational framework for enhancing practical skills in engineering distance learners. In: IEEE Global Engineering Education Conference, 18 March 2015 through 20 March 2015, Tallinn University of Technology (TUT)Tallinn; Estonia.

Vijay, Venkatesh Chennam and Lees, Mel and Chima, Parmjit and Chapman, Craig (2016) Augmented reality environment for engineering distance leaners to acquire practical skills. In: Remote Engineering and Virtual Instrumentation (REV), 2016 13th International Conference on. IEEE, pp. 215-223. ISBN 978-1-4673-8246-5

W

Ward, Michael (2015) Tool-less manufacture: Digital fabrication, 3D printing and the third industrial revolution. In: Handbook of Manufacturing Industries in the World Economy. Edward Elgar Publishing Ltd., pp. 100-108. ISBN 9781781003930 (ISBN); 9781781003923 (ISBN)

Williams, James J. and Kane, David (2012) Engineering programmes in the UK: The student feedback experience. In: Enhancing Learning and Teaching Through Student Feedback in Engineering. Elsevier Ltd., pp. 107-129. ISBN 9781843346456 (ISBN)

X

Xu, Wenping and Cong, Jinting and Proverbs, David. and Zhang, Linlan (2021) An Evaluation of Urban Resilience to Flooding. Water, 13 (15). e2022. ISSN 2073-4441

Y

Yang, Junfeng (2016) Numerical Study of Polymer-induced Drag Reduction in Turbulent Pipe Flow. In: 5th International Conference of Bionic Engineering, 21st - 24th June 2016, Ningbo.

Yang, Junfeng and Jimenez Serratos, Maria G. and Fari-Arole, Damilola and Muller, Erich and Matar, O.K. (2015) Crude Oil Fouling: Fluid Dynamics, Reactions and Phase Change. Procedia IUTAM, 15. pp. 186-193. ISSN 2210-9838

Yang, Junfeng and Narayanan, Chidambaram and Lakehal, Djamel (2016) Large Eddy & Interface Simulation (LEIS) of disturbance waves and heat transfer in annular flows. Nuclear Engineering and Design, 321. pp. 190-198. ISSN 0029-5493

Yang, Junfeng and Sileri, D. and Matar, O.K. (2014) Chapter 5.3 Fundamental transport modeling. In: Crude Oil Fouling. Elsevier, pp. 64-106. ISBN 9780128012567

Yang, Junfeng and Tajudin, Zulhafiz and Coletti, Francesco and Muller, Erich and Macchietto, Sandro and Matar, O.K. (2015) Numerical Simulation of Fouling in Crude-Oil Heat Exchangers: The Interaction Between Different Fouling Routes. In: 2015 AIChE Annual Meeting Proceedings. AIChE. ISBN 978-0-8169-1094-6

Yang, Po and Wu, Wenyan (2014) Efficient Particle Filter Localization Algorithm in Dense Passive RFID Tag Environment. IEEE Transactions on Industrial Electronics, 61 (10). pp. 5641-5651. ISSN 0278-0046

Z

Zaglago, L. and Chapman, C. and Shah, H. and Apulu, I. (2014) Cultural dynamics in Enterprise Resource Planning (ERP) system implementation. In: International MultiConference of Engineers and Computer Scientists, IMECS 2013 under the World Congress on Engineering, WCE 2013, 3 July 2013 through 5 July 2013, London, UK.

Zhao, Liang and Zhang, Jili and Shen, Yue and Wu, Wenyan (2015) Design and Implementation of Energy Saving Controller for Air-Conditioner in Building. International Journal of Smart Home, 9 (8). pp. 47-54. ISSN 1975-4094

Zhao, R. and Deutz, P. and Neighbour, Gareth B and McGuire, M. (2012) Carbon emissions intensity ratio: an indicator for an improved carbon labelling scheme. Environmental Research Letters, 7. pp. 1-9.

Zhao, R. and Neighbour, Gareth B and Deutz, P. (2010) Cleaner Production: A Game between Government and Manufacturers? In: Proceedings of 10th UK Chinese Association of Resource & Environment Annual Meeting. Chinese Association of Resource & Environment. ISBN 978-0-9551965-5-3

Zhao, R. and Neighbour, Gareth B and Deutz, P. (2011) Preliminary Study of Hazardous Materials Management: An Optimization Model in the Context of Green Supply Chain Management. In: Proceedings of 5th International Conference on Bioinformatics and Biomedical Engineering. IEEE. ISBN 978-1-4244-5088-6

Zhao, R. and Neighbour, Gareth B and Deutz, P. (2011) Selection of Carbon Materials for Cleaner Industrial Production: An Environmental Evaluation Approach. In: Proceedings of International Conference on Carbon. International Conference on Carbon.

Zhao, R. and Neighbour, Gareth B and Deutz, P. and McGuire, M. (2012) Environmentally Friendly Products: A Game between Manufacturers and Consumers? In: 18th Annual International Sustainable Development Research Conference, 24-26 June 2012.

Zhao, R. and Neighbour, Gareth B and Deutz, P. and McGuire, M. (2012) Materials Selection for Cleaner Production: an Environmental Evaluation Approach. Materials and Design, 37. pp. 429-434. ISSN 0264-1275

Zhao, R. and Neighbour, Gareth B and Han, J. and Deutz, P. (2010) Application of Game Theory to Supply Chain Network of Hazardous Materials: Environmental Risk and Carbon Footprint. In: Summer Symposium on Sustainable Systems (4S), 15th-17th June 2010, Sannäs, Finland.

Zhao, R. and Neighbour, Gareth B and Han, J. and McGuire, M. and Deutz, P. (2012) Using game theory to describe strategy selection for environmental risk and carbon emissions reduction in the green supply chain. Journal of Loss Prevention in the Process Industries, 25 (6). pp. 927-936. ISSN 0950-4230

Zhao, R. and Neighbour, Gareth B and McGuire, M. and Deutz, P. (2012) A Software Based Simulation for Cleaner Production: A Game between Manufacturers and Government. Journal of Loss Prevention in the Process Industries, 26 (1). pp. 59-67. ISSN 0950-4230

Zhu, Chunli and Hemida, Hassan and Flynn, Dominic and Baker, Chris and Liang, Xifeng and Zhou, Dan (2017) Numerical simulation of the slipstream and aeroacoustic field around a high-speed train. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231 (6). pp. 740-756. ISSN 0954-4097

This list was generated on Wed Jan 12 01:25:10 2022 UTC.

Research

In this section...